NHTSA ID Number: 11720468
Complaint Date: 2026-02-25
Fail Date: 2026-02-13
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2018
Summary
Manufacturer is claiming to have "No Remedy" for this recall (C4B). However, they were able to replace the defective part, charged me for the repair and offered a reimbursement. However, they are not offering to reimburse the full cost of the repair. It has come to my knowledge that Ram does have a remedy, as they have reengineered the HCU part affected by this recall and issued a new part number for the updated parts. Original part was 68143491AA and has since been updated to 68143491AB after this recall was issued. It appears that Ram is lying to consumers about having "No Remedy" when they do in fact have one. I am assuming they do not want fix these vehicles unless the original part fails as a cost savings on this recall. The issue is they are refusing to cover the entire cost of the recall repair when the vehicle did need to be fixed. I was charged $1185.56 for this repair in February of 2026 and Ram is only offering $1141.85 as the reimbursement amount. This recall should have been covered at zero charge and without requiring me to pay upfront for the repair, as it is evident by updated part numbers that Ram does in fact have a remedy.
Read More...NHTSA ID Number: 11720467
Complaint Date: 2026-02-25
Fail Date: 2026-02-10
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: FOCUS
Model Year: 2017
Summary
My vehicles engine died in traffic and left me stranded in the middle of a busy road. Upon a mechanics review the issue is a siezed engine because of the oil pump pickup tube clogged with pieces of the oil pump or timing chain pulleys that had broken off.
Read More...NHTSA ID Number: 11720466
Complaint Date: 2026-02-25
Fail Date: 2024-09-09
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2019
Summary
When approaching a light, the car will completely shut off and my steering wheel will lock, and the emergency break will engage. I will be unable to use any part of my car for at least 1-2 minutes before the break releases and allows me to start my car again.
Read More...NHTSA ID Number: 11720464
Complaint Date: 2026-02-25
Fail Date: 2026-02-09
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2024
Summary
The paint on my make and model vehicle has a widespread paint adhesion defect, not isolated to road debris damage. I have reported the issue to my dealer and to Hyundai Customer Care and I have been told that it would not fall under a warranty repair. The paint delamination is extensive enough to lead to structural rust if it is not repaired.
Read More...NHTSA ID Number: 11720463
Complaint Date: 2026-02-25
Fail Date: 2026-01-02
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2013
Summary
I took my car in for a safety recall for the bushing on the transmission. A short time after getting it back my cabin filled with smoke when I used the remote start. I had never had this problem until it came back from the dealer. so I stopped using the remote start! but after that the car's cabin began filling with acrid smoke whenever it idled for more than a minute. It now fills with smoke when sitting at a stop sign or in slow traffic, so i have to open the windows to breathe! On top of that the transmission started slipping in park again! I don't think they actually fixed it. and that they may have caused the smoke problem. there are no warning lights going on. I am [XXX] and on socsec. I need my car to be safe! I have been dealing with this for a while now because I don't trust the dealer now. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720462
Complaint Date: 2026-02-25
Fail Date: 2026-02-14
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2022
Summary
ICCU failed at ~27,000 miles. Loud pop came from the under the vehicle. Afterwards, car could only accelerate to 35 mph. Dashboard error message told driver there was an electrical issue and advised us to pull over. Car had to be towed. Currently at the dealer awaiting a replacement. Dealership said it could take "weeks or months" to get a replacement part. Sudden loss of propulsion is a safety risk to other drivers. We were on the highway and could not get to speed. ICCU malfunctions appear to be very common with Hyundai EVs. Hyundai appears to be aware that this is a problem but doesn't seem very interested in solving it.
Read More...NHTSA ID Number: 11720461
Complaint Date: 2026-02-25
Fail Date: 2026-02-11
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: RIDGELINE
Model Year: 2017
Summary
The contact owns a 2017 Honda Ridgeline. The contact stated that while starting and driving the vehicle, the driver became aware that the engine was knocking. The vehicle was driven to a local dealer, where it was diagnosed, and the failure was associated with NHTSA Campaign Number: 23V751000 (ENGINE AND ENGINE COOLING); however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 90,000.
Read More...NHTSA ID Number: 11720460
Complaint Date: 2026-02-25
Fail Date: 2026-02-24
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2023
Summary
ICCU failure, stranded wife and kids in the Minnesota cold. This issue is not fixed.
Read More...NHTSA ID Number: 11720459
Complaint Date: 2026-02-25
Fail Date: 2025-11-27
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2025
Summary
The contact owns a 2025 Nissan Rogue. The contact stated that while driving at 25 MPH, there was a loud banging sound coming from the rear of the vehicle. The contact looked back and became aware that the window had exploded and there were glass shards everywhere. The contact stated that the failure had occurred twice. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 15,000.
Read More...NHTSA ID Number: 11720458
Complaint Date: 2026-02-25
Fail Date: 2026-02-25
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: DURANGO
Model Year: 2021
Summary
The contact owns a 2021 Dodge Durango. While the contact’s wife was driving at an undisclosed speed, the daytime running lights became inoperable. There was no warning light illuminated. The contact was alerted to the failure by another driver. The contact also confirmed the failure when the vehicle was pulled into the driveway at the residence. The vehicle was taken to an independent mechanic, who diagnosed that the running lights had failed and needed to be replaced. The mechanic referred the contact to the dealer for assistance. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 68,000. The VIN was not available.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.