Complaints List


Loading...

Loading...


NHTSA ID Number: 11719977

Complaint Date: 2026-02-23

Fail Date: 2026-02-23

Manufacturer Name: Triumph Motorcycles America, Ltd.

Vehicle Make: TRIUMPH

Vehicle Model: ROCKET 3 GT

Model Year: 2020


Summary

The contact owns a 2020 Triumph Rocket 3 GT. The contact stated that the rear brake master cylinder failed to move fluid through the system properly, which required an extended distance to stop the motorcycle. The contact referenced NHTSA Campaign Number: 23V730000 (SERVICE BRAKES, HYDRAULIC); and associated the failure with the recall; however, after the repair was performed twice, the failure persisted. The dealer was notified of the most recent failure. The motorcycle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 5,849.

Read More...

NHTSA ID Number: 11719976

Complaint Date: 2026-02-23

Fail Date: 2026-02-16

Manufacturer Name: Honda (American Honda Motor Co.)

Vehicle Make: HONDA

Vehicle Model: CIVIC SI

Model Year: 2024


Summary

The engine in my Honda Civic Si failed prematurely at 28,677 miles while the vehicle was still within Honda’s 5-year/60,000-mile powertrain warranty. Honda and the dealership denied warranty coverage based on a recorded engine overspeed event of 6,900 RPM that occurred earlier at 19,259 miles. The engine’s rev limiter is 6,600 RPM, meaning the recorded event exceeded the limiter by only 300 RPM. After this recorded event, the vehicle continued to operate normally for approximately 9,400 additional miles with no warning lights, drivability issues, or indication of engine damage. The engine failure occurred suddenly at low mileage without prior symptoms. Honda has not provided clear technical evidence demonstrating how a minor overspeed event of this magnitude, occurring thousands of miles earlier, directly caused the engine failure. This raises concerns about premature engine failure, possible engine defects, and the reliability and durability of the Honda Civic Si 1.5T engine. It also raises concerns about manufacturers denying warranty coverage for failures without clear causal evidence. This failure resulted in loss of vehicle function and significant financial burden. The vehicle has been properly maintained and was operated under normal driving conditions. I am submitting this complaint because premature engine failure at such low mileage may indicate a defect affecting engine durability, safety, and reliability

Read More...

NHTSA ID Number: 11719975

Complaint Date: 2026-02-23

Fail Date: 2026-01-15

Manufacturer Name: Hyundai Motor America

Vehicle Make: HYUNDAI

Vehicle Model: IONIQ 5

Model Year: 2022


Summary

The contact owns a 2022 Hyundai Ioniq 5. The contact stated that while driving at an undisclosed speed, the message “Check Electrical System Immediately” was displayed. The contact stated that the failure had occurred while the contact's minor children were inside the vehicle. The vehicle was driven to the residence. The vehicle was later towed to the dealer, where it was diagnosed with a failed ICCU and fuse. The contact was informed that the ICCU and fuse needed to be replaced. The vehicle was not repaired. The contact was informed that the parts for the repair were on back order. In addition, the contact stated that the vehicle was repaired under NHTSA Campaign Number: 24V868000 (Electrical System); in February 2025. The contact stated that only the software update was performed. In addition, the contact stated that the failure was a known failure with the vehicle. The manufacturer was made aware of the failure, and a case was filed. The contact was informed that the vehicle was no longer covered under warranty. The failure mileage was approximately 120,000.

Read More...

NHTSA ID Number: 11719974

Complaint Date: 2026-02-23

Fail Date: 2025-07-14

Manufacturer Name: Chrysler (FCA US, LLC)

Vehicle Make: JEEP

Vehicle Model: WRANGLER

Model Year: 2025


Summary

engine hesitation, or loss of power, normally in 3rd or 4th gear under light acceleration Jeep dealer has no interest in trying to correct issue, said it's normal with a standard shift transmission, was in dealership on first service 2-16-26, mileage was app 1225 noticed hesitation immediately upon taking ownership but in speaking with service advisor we decided to wait for first service Any loss of power has me very concerned Please advise! Thanks for your consideration

Read More...

NHTSA ID Number: 11719973

Complaint Date: 2026-02-23

Fail Date: 2026-02-23

Manufacturer Name: Volkswagen Group of America, Inc.

Vehicle Make: VOLKSWAGEN

Vehicle Model: TAOS

Model Year: 2023


Summary

I was told there was a leak in my coolant system that has happened to many other with the 22 and 23 taos. If out of warranty the claim would be almost 5k even though my car is only 2 years old. The work needed to be done is labor intensive and also a issues with the cylinder head gasket.

Read More...

NHTSA ID Number: 11719972

Complaint Date: 2026-02-23

Fail Date: 2026-02-20

Manufacturer Name: Hyundai Motor America

Vehicle Make: HYUNDAI

Vehicle Model: IONIQ 5

Model Year: 2024


Summary

Routine Friday morning and just finished charging my 2024 Hyundai Ioniq 5 at Walmart. As I started my vehicle to finish my commute to work, the dreaded "Check electric vehicle system" warning light came on along with a red battery icon. There were no warning signs or anything that could have foretold what would be happening. I pulled into an empty parking stall and called the Hyundai dealer for advice. I was told not to drive the vehicle and get it towed to the dealership. After being diagnosed, my car will need a new ICCU and ICCU fuse. The dealership gave me no ETA as it often takes weeks to months to receive the parts from Korea. I was told Fontana Hyundai had 9 other cars with the same ICCU issue in line before mine. I was so glad it occurred in a parking lot and not on the freeway since a malfunction with the ICCU will basically cause the car to loose total power and control. This is definitely a huge concern and safety issue.

Read More...

NHTSA ID Number: 11719971

Complaint Date: 2026-02-23

Fail Date: 2025-11-10

Manufacturer Name: General Motors, LLC

Vehicle Make: GMC

Vehicle Model: YUKON XL

Model Year: 2016


Summary

AFM system failed resulting in engine replacement.

Read More...

NHTSA ID Number: 11719970

Complaint Date: 2026-02-23

Fail Date: 2020-02-23

Manufacturer Name: General Motors, LLC

Vehicle Make: GMC

Vehicle Model: YUKON

Model Year: 2016


Summary

The contact owns a 2016 GMC Yukon. The contact stated that the vehicle was initially repaired under warranty for a bent push rod in cylinder #4; however, the failure recurred. The vehicle was repaired another time at the expense of the contact's son, who previously owned the vehicle; however, the failure persisted. The contact stated that while idling and while driving, the engine was misfiring and running rough. Additionally, there was a significant amount of smoke coming from the exhaust pipe. The check engine warning light was illuminated. The vehicle was taken back to the dealer, where it was diagnosed, and the dealer determined that the engine needed to be replaced. The vehicle was not repaired due to the cost. The manufacturer was contacted and informed that the repair would not be covered because the vehicle was out of warranty. The failure mileage was approximately 27,000.

Read More...

NHTSA ID Number: 11719969

Complaint Date: 2026-02-23

Fail Date: 2025-10-07

Manufacturer Name: Chrysler (FCA US, LLC)

Vehicle Make: DODGE

Vehicle Model: CHALLENGER

Model Year: 2012


Summary

The contact owns a 2012 Dodge Challenger. The contact stated that when shifting the vehicle to reverse(R) or to neutral(N), the vehicle would only move forward. There were no warning lights illuminated. The contact had taken the vehicle to two independent mechanics and was advised that there were known issues associated with the transmission valve body. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was 211,015.

Read More...

NHTSA ID Number: 11719968

Complaint Date: 2026-02-23

Fail Date: 2026-02-18

Manufacturer Name: BMW of North America, LLC

Vehicle Make: BMW

Vehicle Model: X5

Model Year: 2026


Summary

I went to drive the car and there was a drivetrain malfunction error. The car could not be driven and had to be towed.

Read More...


Bestseller No. 1
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)
  • CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
  • Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
  • Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
  • OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
  • Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
Bestseller No. 2
MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow
  • Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
  • Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
  • 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
  • Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
  • ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
Bestseller No. 3
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
  • 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
  • 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
  • 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
  • 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
  • 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...