NHTSA ID Number: 11719917
Complaint Date: 2026-02-23
Fail Date: 2025-12-23
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2014
Summary
The contact owns a 2014 Chevrolet Silverado 1500. The contact stated that while driving at an undisclosed speed, the steering wheel failed to steer in the intended direction. The power steering warning light was illuminated. The vehicle was taken to the dealer, where it was diagnosed with a failed electronic power steering module. The contact was informed that the electronic power steering module needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The contact was informed of an unknown recall that had a similar failure description. In addition, the contact was informed that an unknown recall repair was performed on the vehicle in 2017. The failure mileage was approximately 130,000.
Read More...NHTSA ID Number: 11719916
Complaint Date: 2026-02-23
Fail Date: 2025-07-08
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2021
Summary
The contact owns a 2021 Ford F-150. The contact stated that while driving 75 MPH, the vehicle started jerking abnormally while attempting to accelerate. The vehicle was driven to the dealer, where it was diagnosed, and the failure was associated with NHTSA ID Number: 25V455000 (FUEL SYSTEM, GASOLINE); however, the part to do the recall repair was unavailable. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 113,000.
Read More...NHTSA ID Number: 11719915
Complaint Date: 2026-02-23
Fail Date: 2026-02-03
Manufacturer Name: BMW of North America, LLC
Vehicle Make: MINI
Vehicle Model: COOPER
Model Year: 2020
Summary
A driver drove head on into my drivers seat door hard enough that his front bumper completely detached from his car and my door could not open, close, or lock, and my car was not drivable. My car has side airbags. No airbag deployed. I had to go to the hospital immediately after the accident. There is no open recall on my 2020 Mini 2 door hardtop. Shouldn't an airbag have deployed?
Read More...NHTSA ID Number: 11719914
Complaint Date: 2026-02-23
Fail Date: 2026-02-16
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2025
Summary
ICCU failure causing the vehicle to be inoperable
Read More...NHTSA ID Number: 11719913
Complaint Date: 2026-02-23
Fail Date: 2025-06-01
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2018
Summary
HCU Hydraulic Control Unit ABS malfunction. Intermittent loss of ABS/ESC/Traction control. Constant warning lights flashing on and off on screen display in truck with audible alarm. Vehicle is not listed as having a recall, however, this is the exact same issue as many other 2018 Ram 2500 trucks that were included in the recall and my VIN is included in the numbers for the Class Action Lawsuit. The loss of ABS/ESC/Traction control may cause my vehicle to crash without prior warning. My vehicle needs to be included in the Safety Recall Reference: C4B / NHTSA 24V-896
Read More...NHTSA ID Number: 11719912
Complaint Date: 2026-02-23
Fail Date: 2026-02-23
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2015
Summary
The contact owns a 2015 Ford Escape. The contact stated that while reversing, the rearview camera was inoperative. The failure had occurred on several occasions. No warning lights were illuminated. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted; however, the vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was not available.
Read More...NHTSA ID Number: 11719911
Complaint Date: 2026-02-23
Fail Date: 2026-02-18
Manufacturer Name: Bombardier Recreational Products, Inc.
Vehicle Make: CAN-AM
Vehicle Model: SPYDER F3
Model Year: 2024
Summary
I cold started the motorcycle and while waiting for a security gate to open the engine suddenly quit. I hit the starter and it immediately restarted. Then after I pulled out into traffic the engine died again. Fortunately I was in the right hand lane and again hit the starter and the engine again immediately restarted. By this time I knew I had a serious problem. Trying to get to a traffic light to make a u-turn back to where I store the bike the engine suddenly, again without any warning, died a third time while traveling at around 35 mph in traffic. I was able to safely coast over to the curb and hit the starter button and the engine immediately restarted. I was able to get back to my storage unit without further incident. At no time did I perceive any warning lights or check engine light. Upon each restart the engine ran perfectly without any roughness or stumbling. Power output was normal. Obviously this situation could result in an accident causing serious injury or death to me and/or others. The dealer came out and trailered the bike back for inspection. All they did was let the engine idle for a few minutes to warm up the oil for a requested oil change and check the computer for faults. None were found. They claim to have called the manufacture for advice and were told that since they did not reproduce the issue and there were no computer faults that is all they could do. I have refused delivery of the bike until this issue has been fully and unequivocally resolved as driving a vehicle with a known safety issue and causing an accident could result in me being sued in addition to injury or death. I have called CAN AM corporate customer service this morning to advise them of the issue. They will look into this situation and get back to me. Meantime the bike is still at the dealer for inspection. The issue appeared Wednesday the 18th for the first time. I have not been on it since. No one else has looked at the bike at this time except the dealer.
Read More...NHTSA ID Number: 11719910
Complaint Date: 2026-02-23
Fail Date: 2026-02-23
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2019
Summary
The contact owns a 2019 Jeep Cherokee. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was taken to the dealer, who determined that the rear-view camera needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 49,000.
Read More...NHTSA ID Number: 11719909
Complaint Date: 2026-02-23
Fail Date: 2026-02-01
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: EV6
Model Year: 2022
Summary
ICCU failure. It blew up my home charger and shorted out. Would no longer charge the car on level 1 or 2 charger.
Read More...NHTSA ID Number: 11719908
Complaint Date: 2026-02-23
Fail Date: 2026-02-18
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SONATA
Model Year: 2015
Summary
I am reporting a re-failure of Safety Recall 152. The panoramic sunroof wind deflector, which was previously 'repaired' in 2017 under this recall, has failed again. The broken parts have jammed the sunroof mechanism, preventing it from closing. According to NHTSA Recall 152, this failure poses a severe safety risk as the sunroof glass can detach from the vehicle while driving. The vehicle has only 55,000 miles. Hyundai has currently refused to honor the recall remedy because the 10-year warranty expired 3 months ago, but a safety recall remedy must be permanent and effective.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.