NHTSA ID Number: 11719927
Complaint Date: 2026-02-23
Fail Date: 2025-12-31
Manufacturer Name: BMW of North America, LLC
Vehicle Make: BMW
Vehicle Model: 328I
Model Year: 2009
Summary
The security system, alarm system and key fob have all been tampered with.
Read More...NHTSA ID Number: 11719926
Complaint Date: 2026-02-23
Fail Date: 2026-02-21
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2014
Summary
The contact owns a 2014 GMC Sierra 1500. The contact stated that while at a stop sign, the vehicle stalled. No warning lights were illuminated. The vehicle was towed back to the residence. A dealer was contacted; however, the vehicle was not diagnosed or repaired. The contact researched and became aware of an undisclosed recall; however, the VIN was not under recall. The manufacturer was not notified of the failure. The failure mileage was approximately 81,000.
Read More...NHTSA ID Number: 11719925
Complaint Date: 2026-02-23
Fail Date: 2026-02-21
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2015
Summary
The contact owns a 2015 Ford F-150. The contact stated that the vehicle was chugging while driving. While driving 60 MPH the following day, the vehicle made abnormal whining sounds and lost motive power while depressing the accelerator pedal. The check engine warning light was illuminated. The contact was able to pull over to the side of the road. The contact resumed driving, but the vehicle failed to exceed 30 MPH. The vehicle was taken to Auto Zone, where it was diagnosed with a transmission sensor failure. The dealer was contacted and informed that the VIN was not under recall. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 94,000.
Read More...NHTSA ID Number: 11719924
Complaint Date: 2026-02-23
Fail Date: 2026-02-19
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2025
Summary
After sitting idle for a few hours, the car jerks and does a sputter when going from reverse to drive
Read More...NHTSA ID Number: 11719923
Complaint Date: 2026-02-23
Fail Date: 2026-02-10
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 6
Model Year: 2025
Summary
My leased 2025 Hyundai Ioniq 6 experienced a sudden malfunction resulting in loss of vehicle operation. The vehicle has been at the dealership with delayed diagnosis and no clear repair timeline provided. This appears to be a safety-related defect involving the electric system. I am aware of multiple reports and recent news coverage describing similar failures in Hyundai/Kia electric vehicles related to ICCU (Integrated Charging Control Unit) defects, which can cause sudden battery discharge and loss of propulsion. Media reports indicate that this defect has affected numerous vehicles and, in some cases, repairs have taken more than a month due to part availability and diagnosis delays. My vehicle experienced similar symptoms, including loss of power / inability to operate normally, and the dealer has not been able to promptly resolve the issue. This appears to be a broader safety-related defect rather than an isolated incident.
Read More...NHTSA ID Number: 11719922
Complaint Date: 2026-02-23
Fail Date: 2026-02-13
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: TRAX
Model Year: 2025
Summary
The contact owns a 2025 Chevrolet Trax. The contact stated that while driving 70 MPH, the rear window on the driver’s side, where the contact’s sister was seated, shattered unexpectedly, causing glass to fall inside and outside the vehicle. Neither an independent mechanic nor a dealer was contacted. The passenger seated in the seat nearest to the window was not injured. The vehicle was not taken to the dealer or an independent mechanic to be repaired. The manufacturer was notified of the failure and informed the contact that there would not be an investigation if the vehicle was repaired. The failure mileage was 7,020.
Read More...NHTSA ID Number: 11719921
Complaint Date: 2026-02-23
Fail Date: 2026-02-20
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SANTA FE
Model Year: 2020
Summary
On the morning of February 20 2026 at around 6:35am. I was on my way to work when the engine light started flashing and the speed started to decrease. I was traveling on a major highway in heavy rain with a lot of traffic. I had to put on my hazard lights and quickly pull off the road. The code given is P1326 which has to do with the engine and wiring harness. I just purchased the vehicle on Jan. 17 2026. The Carfax stated no open recalls.
Read More...NHTSA ID Number: 11719920
Complaint Date: 2026-02-23
Fail Date: 2026-01-05
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: COROLLA
Model Year: 2020
Summary
I am having a problem with my 2020 Toyota Corolla's brakes. I live in [XXX] . In the winter when the car is cold the brakes work normally. When the car has been driven for a while, the car has warmed up, and the brake fluid has thinned, the brakes behave abnormally. When I stop at a red light, after 20 to 40 seconds, the brake pedal slowly drops towards the floor. My understanding is that this could indicate a problem with the master brake cylinder. My fear is that there could be a sudden failure of the cylinder causing an accident. I brought the car to Rudy Luther Toyota in Golden Valley. When I brought the car in, it was warm and the brakes were malfunctioning. Unfortunately, they let the car sit for several hours, the brake fluid cooled, and the mechanic was unable to duplicate the problem. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719919
Complaint Date: 2026-02-23
Fail Date: 2025-08-18
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PILOT
Model Year: 2017
Summary
My Pilot only had 46,942 miles when it failed due to a camshaft thrust cover surface roughness being out of spec causing excessive camshaft movement. This was confirmed by the mechanic at Honda that worked on my Pilot. The pilot was checked for the engine light concern and the technician reported the following: CONFIRMED DTC P0369 CMP SENSOR INTERMITTENT INTERRUPTION. FOUND CMP SENSOR TO HAVE WEAR FROM TIMING GEAR DUE TO CAMSHAFT MOVING SIDE TO SIDE. RECOMMEND REPLACING CAMSHAFT, SENSOR, THRUST PLATE, THRUST CAP, TIMING GEAR AND RELATED HARDWARE TO START. $3895.00 Also recommend replacement of timing belt with tensioner $516.00 There were not warning lamp before the failure. My engine just died and had to be towed to a dealership in Canada close to where I was residing. I felt my safety was at risk because my vehicle died in the middle of the highway and that could have lead to a crash. This is a know issue with 2016-2017 Pilots and Ridgeline. I know this from the service bulletin that was issued in January of 2018. However only certain vehicle were recalled for this exact issue. I contacted America Honda motor company and a Case #XXX was open. I asked to be reimbursed for repairs of $5200.00 Canadian to which they said no. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719918
Complaint Date: 2026-02-23
Fail Date: 2026-01-31
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5 N
Model Year: 2025
Summary
Car's ICCU blew as I was pulling out of my driveway. Was able to limp to the dealer. They replaced the ICCU in a week.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.