NHTSA ID Number: 11719887
Complaint Date: 2026-02-23
Fail Date: 2026-02-22
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2026
Summary
Since purchasing the vehicle on February 4, 2026 this has happened twice, where I press the brake pedal to try to stop the vehicle and the engine accelerates and it's hard to keep vehicle stopped. When this happened for the first time I was leaving my subdivision and try to stop at a stop sign and vehicle accelerated while I was trying to stop. It took me by surprise, so I pressed the park gear to stop the vehicle. Then it happened again yesterday 2/22/2026. I called the dealer today 2/23/2026 to report the issue, they won't have a loaner until 3/06/2026. I did informed them, that if this happened again before then, I was taking the vehicle directly to them, as I'm no taking the chance to have an accident while waiting for a loaner and have the vehicle checked.
Read More...NHTSA ID Number: 11719886
Complaint Date: 2026-02-23
Fail Date: 2026-02-16
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2025
Summary
The airbag was stolen from my 2025 Honda Accord SE without breaking the window. The door lock was broken easily and the airbag removed quickly. This is a serious safety and security concern. A person can steal a critical safety component without major damage. I am financially stressed because the vehicle is financed and I depend on it for work. I am concerned about the vehicle’s design security and safety.
Read More...NHTSA ID Number: 11719885
Complaint Date: 2026-02-23
Fail Date: 2025-05-31
Manufacturer Name: General Motors, LLC
Vehicle Make: CADILLAC
Vehicle Model: ESCALADE
Model Year: 2017
Summary
The 6.2 L engine on my 2017 Cadillac Escalade failed at around 97,000 miles. I took it to Heritage Cadillac dealership for a diagnostic check and had it repaired. The engine had a broken engine rod and lifters damage to the engine. I had the engine repaired at the dealership but a few weeks later I heard rattling noise coming from the engine. I took it back and told I would need a another engine due to complete engine failure. Prior to my engine failure around 55,000 miles, I reported to the same dealership service department that I noticed the engine would give me a rough idle occasionally and burn more gas whenever it happened. I was told it was nothing they could do because the check engine light wasn't on.
Read More...NHTSA ID Number: 11719884
Complaint Date: 2026-02-23
Fail Date: 2025-10-08
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: COMPASS
Model Year: 2017
Summary
The contact owns a 2017 Jeep Compass. The contact stated that while driving approximately 20 MPH, the ABS and Traction Control warning lights illuminated, and the steering wheel and the front passenger’s side of the vehicle were shaking and vibrating abnormally. The contact stopped the vehicle to inspect it and became aware that the front passenger’s side wheel was extremely hot to the touch. The contact deactivated the Traction Control light, and the failure was temporarily corrected before recurring. The cause of the failure was not yet determined. The local dealer was notified of the failure and referred the contact to the manufacturer for assistance. The manufacturer was not yet contacted. The contact was informed that the VIN was not included in NHTSA Campaign Number: 17V301000 (POWER TRAIN). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 61,000.
Read More...NHTSA ID Number: 11719883
Complaint Date: 2026-02-23
Fail Date: 2026-02-02
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: OPTIMA
Model Year: 2013
Summary
The contact owns a 2013 Kia Optima. The contact stated that while driving 5 MPH and attempting to make a right turn, the air bag deployed unexpectedly. A dealer was contacted. The vehicle was taken to a dealer to be diagnosed, and it was determined that the clock spring and air bag needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that the issue would be escalated to the proper department. The approximate failure mileage was 107,000.
Read More...NHTSA ID Number: 11719882
Complaint Date: 2026-02-23
Fail Date: 2026-02-20
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2025
Summary
The contact owns a 2025 Nissan Rogue. The contact stated that while driving out of the driveway, there was an abnormal pop coming from the rear of the vehicle. While pulling over, the rear glass shattered. The vehicle was taken to a glass repair shop to have the rear glass repaired. The vehicle was repaired; however, while exiting the parking lot at approximately 5 - 10 MPH, the glass fractured and shattered, with pieces of glass falling into the rear of the vehicle. The contact pulled over into a parking lot and took a photo before returning home and covering the window with plastic. The vehicle was not taken to be repaired. The manufacturer was not informed of the failure. The failure mileage was 7,652.
Read More...NHTSA ID Number: 11719881
Complaint Date: 2026-02-23
Fail Date: 2026-02-20
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2014
Summary
As I was on my home on 2/20/26, I encountered some issues. I made a right turn onto the highway and my vehicle did a little drift but made this weird sound and the front end shook. There were no warning lights or dings that came across the dash. I pulled over into the closest parking lot to see if I could notice anything. I couldn't because I only had the light from a parking lot lamp. So decided to try and make it home which was another 15 minutes away. As I got back on the road and pressed the accelerator, I could here ticking sounds coming from the rear of the vehicle. When I approached the next traffic light and pressed the brakes, the front end shook, making the steering wheel shake, and the rear end drifted left. I made another left and pressed the accelerator. I got up to around 40 phone. The vehicle started pulling to the left and then stabilizing. I turned to my suspension articulation screen. As I was driving and the vehicle still scaring me to the point of a heart-a-stroke, I could see the axles trying to maintain contact with the road. At the same time giving me the feel of a loose steering wheel and a bad suspension. The vehicle continued to shift and shake and feel loose. When you turn into my neighborhood and before my house, there are two deep curves and a lake. I went into the first curve fine until the end of it. (At this time the lake is on my passenger side). As I was coming out of it, the steering wheel feels like its hard to turn or locked. I have to turn left into the second curve. The vehicle would not turn and the rear end felt like it was drifting right. At the edge of the road there is a slight downhill and the lake about 50 ft or so. Luckily, I was able to make the turn before going of the side of the road. Once I made it through the curve, the vehicle did do some shaking, loose steering, shaking, and back end motion until I parked in the yard. Its been parked since then. Thank you for your patience and attention to this matter.
Read More...NHTSA ID Number: 11719880
Complaint Date: 2026-02-23
Fail Date: 2025-10-27
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2018
Summary
My 2018 Ford F-150 has experienced delayed engagement, harsh/erratic gear shifting in low to moderate speeds, extreme hesitation resulting in loss of power in the 10R80 transmission. I took my truck to a Ford dealership for a diagnosis. The service technician immediately stated a new transmission was needed at 71,000 miles. I have maintained regular service and have all service records. The dealer installed a new transmission for $10, 458.67. Truck also has a moldy smell in the cabin after it rains. Service technician said this is a common issue and to spray Lysol and turn the heater on to kill the mold and to evaporate any standing water in the evaporation system.
Read More...NHTSA ID Number: 11719879
Complaint Date: 2026-02-23
Fail Date: 2026-02-21
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2017
Summary
Driving down the road, and suddenly driver side of rear windshield exploded. GM has publicly acknowledged faulty circuit/glass in prior (expired) campaign in US (N192265660) and apparently there is a full recall in Canada for this problem, 2014-2018 Silverado 1500 with power sliding rear windshield. Chevrolet/GM told me they would not offer any assistance in repair. Repair cost is $948 at local glass shop. Will upload receipt after repair. Of course, this could have caused a major incident on the highway, from losing control of vehicle, heart attack, ,glass could go flying...However, my dog and I maintained our cool and there were no injuries. No one has inspected this. The glass will be replaced in two days. Dealership wasn't interested in helping. There were no warning lamps at all. I bought vehicle in 2021, after N192265660 "expired", and thusly had no knowledge of nor opportunity to fix the issue, as GM never notified me of it.
Read More...NHTSA ID Number: 11719878
Complaint Date: 2026-02-23
Fail Date: 2026-02-18
Manufacturer Name: Mazda Motor Corp.
Vehicle Make: MAZDA
Vehicle Model: CX-50
Model Year: 2025
Summary
Driver side and passenger side axle-area damage, making loud clicking and popping sounds on turns indicating major damage to CV joint, at around 5000 miles. Primarily heard on sharply turned wheel acceleration, particularly on slightly uphill inclines.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.