NHTSA ID Number: 11028142
TSB Date: 2026-02-03
Manufacturer Communication Number: SSPD8 Parts and Warr a
Summary
SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of the fail-safe thermostat is extended to: 15 years (180 months) or 150,000 miles (240,000 km) whichever comes first, from the original warranty start date. CONDITION OF CONCERN: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: - Engine takes longer to warm up. - Engine temperature gauge fluctuates. - Low coolant temperature indicator (blue) light stays on longer or turns on while driving. - Poor heater performance, especially at idle. Mazda Motor Corporation has made a significant repair change to TSB 01-003/25 which also impacts Warranty Extension Special Service Program (SSPD8). Repair Procedure Update: Effective December 8th all repairs applicable to TSB 01-003/25 or SSPD8 must follow the new repair procedure. The repair now replaces the thermostat with a dummy plug for the coolant control valve (CCV) along with a required software update for the PCM. Prior Repairs: Any repairs previously completed with the replacement of the thermostat or coolant control valve assembly does not require a re-repair unless there is a verified failure following the diagnosis in the TSB. It is expected that there will be no further repairs made for this concern once the plug and software update has been completed. Therefore, a return visit for symptoms related to the TSB or SSP must contact the Technical Hotline for assistance. VITALLY IMPORTANT!: There must be a “Software Update” record for the PCM when using MDARS or IDS. • MDARS - If there is no Software Update entry in MDARS or the Collect Diagnostic Information (ODR Update) is not completed (or both), the vehicle will not be considered repaired and the warranty claim will be rejected. • IDS – Vehicles programed with IDS must Collect Diagnostic Data, and that data must be attached to the warranty claim. If the data is not attached to the claim, the vehicle will not be considered repaired and the warranty claim will be rejected, denied or debited. Failure to complete the above will require the vehicle to return to the dealership and be re-repaired at the dealer’s expense with great inconvenience to the Mazda customer. Failure to perform the software update could also potentially damage the engine which would not be covered by warranty and would expose your dealership to the cost of repairs.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028141
TSB Date: 2026-02-03
Manufacturer Communication Number: TSB26-150-001
Summary
This service bulletin is about certain vehicles that may experience leaks through the cab roof seams into the cab interior and instructions on how to repair the leak.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028140
TSB Date: 2026-02-03
Manufacturer Communication Number: PHX-25.1.2.5.5 Expedition
Summary
"Quality improvements include: -Android Auto enhancements -Android security updates"
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028139
TSB Date: 2026-02-03
Manufacturer Communication Number: MSP66 Warranty a
Summary
Subject: Mazda Service Program MSP66 - Engine Warning Light Illumination with DTC P0DAB 2024-2026 CX-90 and 2025-2026 CX-70, with H3T M Hybrid Boost. Mazda Motor Corporation has decided to conduct a Mazda Service Programs (MSP66) for vehicles in the U.S. and U.S. Territories. Mazda vehicles sold in Canada and Mexico are also affected by this program and must be repaired if presented to your dealership. All vehicles in this program will be in “Open” status on December 15, 2025 concurrent with the announcement of this communication. MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 7,000 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or Certified Pre-Owned in-stock vehicles until the repair is completed. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired. The affected dealer list will be provided to your District Service Manager daily beginning with receipt of this dealer email.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028138
TSB Date: 2026-02-03
Manufacturer Communication Number: MSP66 Video
Summary
Subject: Mazda Service Program MSP66 - Engine Warning Light Illumination with DTC P0DAB 2024-2026 CX-90 and 2025-2026 CX-70, with H3T M Hybrid Boost. Mazda Motor Corporation has decided to conduct a Mazda Service Programs (MSP66) for vehicles in the U.S. and U.S. Territories. Mazda vehicles sold in Canada and Mexico are also affected by this program and must be repaired if presented to your dealership. All vehicles in this program will be in “Open” status on December 15, 2025 concurrent with the announcement of this communication. MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 7,000 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or Certified Pre-Owned in-stock vehicles until the repair is completed. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired. The affected dealer list will be provided to your District Service Manager daily beginning with receipt of this dealer email.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028137
TSB Date: 2026-02-03
Manufacturer Communication Number: ABS-25.AR Aviator
Summary
"Quality improvements include: -Addresses a false positive Diagnostic Trouble Code due to high sensitivity that may cause a hard brake pedal and some lamps in the cluster. Issue gets resolved in the next key cycle -Addresses key off load battery usage caused by the Electric brake boost staying active"
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028136
TSB Date: 2026-02-03
Manufacturer Communication Number: MSP66 Repair b
Summary
Subject: Mazda Service Program MSP66 - Engine Warning Light Illumination with DTC P0DAB 2024-2026 CX-90 and 2025-2026 CX-70, with H3T M Hybrid Boost. Mazda Motor Corporation has decided to conduct a Mazda Service Programs (MSP66) for vehicles in the U.S. and U.S. Territories. Mazda vehicles sold in Canada and Mexico are also affected by this program and must be repaired if presented to your dealership. All vehicles in this program will be in “Open” status on December 15, 2025 concurrent with the announcement of this communication. MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 7,000 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or Certified Pre-Owned in-stock vehicles until the repair is completed. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired. The affected dealer list will be provided to your District Service Manager daily beginning with receipt of this dealer email.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028134
TSB Date: 2026-02-03
Manufacturer Communication Number: MSP66 Repair a
Summary
Subject: Mazda Service Program MSP66 - Engine Warning Light Illumination with DTC P0DAB 2024-2026 CX-90 and 2025-2026 CX-70, with H3T M Hybrid Boost. Mazda Motor Corporation has decided to conduct a Mazda Service Programs (MSP66) for vehicles in the U.S. and U.S. Territories. Mazda vehicles sold in Canada and Mexico are also affected by this program and must be repaired if presented to your dealership. All vehicles in this program will be in “Open” status on December 15, 2025 concurrent with the announcement of this communication. MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 7,000 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or Certified Pre-Owned in-stock vehicles until the repair is completed. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired. The affected dealer list will be provided to your District Service Manager daily beginning with receipt of this dealer email.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028133
TSB Date: 2026-02-03
Manufacturer Communication Number: SA-005-26
Summary
There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method • B. Auxiliary Key Code Cut Method 2019 and newer models require a 10-digit key code to accurately cut keys • 5-digit codes CANNOT be provided for 2019 and newer vehicles (the traditional 5-digit code from the key tag or driver's door lock cylinder is not sufficient and will not be issued for key cutting on these models). • Only Mazda-approved key cutting machines can process these 10-digit codes. • Many older key machines do not support 10-digit codes and cannot be updated to do so. In these cases, dealers will need to purchase one of the newer Mazda-approved key cutting machines capable of handling this requirement. • For a list of current Mazda-approved machines and purchasing options, refer to the Mazda Dealer Equipment Program or view the current Mazda approved key machines below.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028130
TSB Date: 2026-02-03
Manufacturer Communication Number: SA-004-26
Summary
Some customers may complain that a door beltline molding is loose, fell off, or is missing.
View or Download (TSB) Technical Service Bulletin PDF
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.