NHTSA ID Number: 11028129
TSB Date: 2026-02-03
Manufacturer Communication Number: SA-003-26
Summary
Customers may report that the liftgate does not open or unlatch (from closed or an ajar position). This may happen after a discharged battery or after charging a dead battery.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028128
TSB Date: 2026-02-03
Manufacturer Communication Number: SA-002-26
Summary
Some customers may complain that the tire sidewalls are distorted or "damaged". Sidewall waviness/indentations/undulations are common on radial tires and are more noticeable on tires with taller sidewalls. The higher the tire pressure, the more noticeable the effect will be. Be sure to set the tire pressures at the recommended tire pressure on the vehicle tire label. Sidewall indentations are a cosmetic condition that does not affect the performance of the tires.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028127
TSB Date: 2026-02-03
Manufacturer Communication Number: SA-001-26
Summary
Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028126
TSB Date: 2026-02-03
Manufacturer Communication Number: 402012
Summary
Generic helpful prints and documents to help dealers.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028125
TSB Date: 2026-02-03
Manufacturer Communication Number: 16-003-26
Summary
Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7230C1A-NA07_10032 or 7230C2A-NA07_10032). NOTE: If current version is not 7230C1A-NA07_***** or 7230C2A-NA07_*****, this TSB is not applicable. (Ver. 7230C1A-NA07_10032 & 7230C2A-NA07_10032) fixes these software errors (bugs): Improving Wi-Fi security and reliability • (Ver. 7230C1A-NA07_10028 & 7230C2A-NA07_10028) fixes these software errors (bugs): The infotainment screen may turn black when SIRIUSXM® Satellite Radio is selected. However, the camera images on the center display are not affected, and the back camera is usable. • The system may freeze on the disclaimer screen when the engine is started normally after using the remote engine starter. However, the camera images on the center display are not affected, and the back camera is usable. • Only Bluetooth® connection is established when attempting to connect Android Auto™. • Air conditioning settings cannot be controlled via Alexa without a CV contract. • (Ver. 7230C1A-NA07_10022 & 7230C2A-NA07_10022) fixes these software errors (bugs): Exit information may not be displayed while using navigation. • Although the Navigation SD card is removed, a navigation guidance may be displayed in Active Driving Display and/or the center display. • A navigation command by voice recognition may display Mazda Connect incorrectly. • Pressing the commander may sometimes not display the menu after deleting multiple destinations. • The Wi-Fi client menu is unavailable when the in-vehicle communication unit has no signal. • The smartphone may not be charged when a smartphone is connected to a USB port while connected to Apple CarPlay wireless connection.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028124
TSB Date: 2026-02-03
Manufacturer Communication Number: 16-002-26
Summary
Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7230C1A-NA02_10014. NOTE: If current version is not 7230C1A-NA02_***** , this TSB is not applicable. (Ver. 7230C1A-NA02_10014) fixes these software errors (bugs): The infotainment screen may turn black when SIRIUSXM® Satellite Radio is selected. However, the camera images on the center display are not affected, and the back camera is usable. • Air conditioning settings cannot be controlled via Alexa without a CV contract. • The banner display for battery level notifications of Bluetooth®-connected devices has been modified. • Alexa may be signed out when the driver is uninstalled after Alexa has been set up. • Backup and restore may fail in the factory service diagnostics. • The Wi-Fi client connection screen may not disappear even after several seconds. • The system may freeze on the disclaimer screen when the engine is started normally after using the remote engine starter. However, the camera images on the center display are not affected, and the back camera is usable. • When attempting to connect Android Auto™, only Bluetooth® connection is established. • (Ver. 7230C1A-NA02_10012) fixes these software errors (bugs): The smartphone may not be charged when a smartphone is connected to a USB port while connected to wireless CarPlay. • Apple CarPlay® wireless connection may fail. • The Wi-Fi client menu is unavailable when the in-vehicle communication unit has no signal.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028123
TSB Date: 2026-02-03
Manufacturer Communication Number: 16-001-26
Summary
Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7230C1A-NA01_10014 or 7230C2A-NA01_10014). NOTE: If current version is not 7230C1A-NA01_***** or 7230C2A-NA01_*****, this TSB is not applicable. (Ver. 7230C2A-NA01_10014) fixes these software errors (bugs): The banner display for battery level notifications of Bluetooth®-connected devices has been modified. • When the engine is started normally after using the remote engine starter, the system may freeze on the disclaimer screen. However, the camera images on the center display are not affected, and the back camera is usable. • When attempting to connect Android AutoTM, only Bluetooth® connection is established. • The infotainment screen may turn black when SIRIUSXM® Satellite Radio is selected. However, the camera images on the center display are not affected, and the back camera is usable. • (Ver. 7230C2A-NA01_10012) fixes these software errors (bugs): Apple CarPlay® wireless connection may fail. • The smartphone may not be charged when a smartphone is connected to a USB port while connected to Apple CarPlay®. • Although the SD card is removed, a navigation guidance may be displayed in Active Driving Display and/or the center display. • Pressing the commander may sometimes fail to display the menu after deleting multiple destination.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028122
TSB Date: 2026-02-03
Manufacturer Communication Number: 632018
Summary
Drain vent repair if it has reverse slope.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028120
TSB Date: 2026-02-03
Manufacturer Communication Number: LI49.20-N-080011
Summary
Complaint The check engine light is on, with a possibility in a reduction of power, with no soot present in the exhaust system. Fault codes: P300E5F The fill level of the diesel particulate filter is too high. (Early warning) P300E5E The fill level of the diesel particulate filter is too high. Regeneration of the diesel particulate filter is disabled. Additional information: No additional fault codes related to the Diesel Particulate Filter (DPF) system or the Exhaust Gas Recirculation (EGR) system may be present for this LI to apply. Cause These fault codes may be triggered due to unfavorable driving conditions, such as: •Frequent short-distance trips •Extended idle periods •Infrequent highway driving •Incomplete regeneration cycles These conditions can lead to excessive soot accumulation in the Diesel Particulate Filter (DPF), resulting in elevated fill levels and regeneration lockout.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028119
TSB Date: 2026-02-03
Manufacturer Communication Number: LI49.20-N-075995
Summary
Complaint Vehicles with SCR Generation 4: SCR/AdBlue® warning message cannot be reset. Information: All fault codes in the AdBlue® (SCR) control unit have been processed and corrected; however, fault codes P13DF00 and P300685 remain active and stored in the AdBlue® (SCR) control unit. Cause The procedure for resetting the SCR/AdBlue® warning message with XENTRY Diagnosis has not been carried out. Information: Before resetting the SCR/AdBlue® warning message for SCR Generation 4, the AdBlue® system must be in proper working condition and tested.
View or Download (TSB) Technical Service Bulletin PDF
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.