NHTSA ID Number: 11719837
Complaint Date: 2026-02-23
Fail Date: 2026-02-09
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PILOT
Model Year: 2017
Summary
The contact owns a 2017 Honda Pilot. The contact stated that while driving at an undisclosed speed, the vehicle failed to accelerate while depressing the accelerator pedal. There were several unknown warning lights illuminated. The contact referenced NHTSA Campaign Number: 23V858000 (FUEL SYSTEM, GASOLINE); however, the VIN was not included in the recall. The dealer was not notified of the failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 143,000.
Read More...NHTSA ID Number: 11719836
Complaint Date: 2026-02-23
Fail Date: 2026-02-23
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EDGE
Model Year: 2017
Summary
The contact owns a 2017 Ford Edge. The contact received notifications of NHTSA Campaign Numbers: 25V544000 (Service Brakes, Hydraulic) and 25V572000 (Back Over Prevention); however, the parts to do the recall repairs were not yet available. The dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719835
Complaint Date: 2026-02-23
Fail Date: 2024-11-01
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2017
Summary
Nov 27,2024 Manufacturer Recall Number: C4B NHTSA Recall Number: 24V-896 Recall Status: Recall Incomplete, remedy not yet available RAM unable to remedy this safety recall for my vehicle
Read More...NHTSA ID Number: 11719834
Complaint Date: 2026-02-23
Fail Date: 2026-02-20
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: YUKON XL
Model Year: 2003
Summary
Odometer Fraud. The contact purchased a 2003 GMC Yukon XL. It was later discovered that there was a mileage discrepancy. The vehicle was a dealer sale on January 26th, 2026. At the time of purchase and at the time of the vehicle registration, the vehicle mileage was 186,000. While applying for insurance on February 20, 2026, the contact was informed that the vehicle was due for a 300,000-mile maintenance plan. The contact confirmed through the Carfax Report that the actual mileage was 300,000. The dealer was contacted and informed of the odometer fraud discovery; however, the dealer refused further contact to resolve the issue. The odometer fraud was also reported to the State Consumer Protection Division.
Read More...NHTSA ID Number: 11719833
Complaint Date: 2026-02-23
Fail Date: 2026-02-19
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: TERRAIN
Model Year: 2018
Summary
Brakes were hard to engage or press when stopping due to Vacuum pump stop working. Had to replace the vacuum pump
Read More...NHTSA ID Number: 11719832
Complaint Date: 2026-02-23
Fail Date: 2025-12-08
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SELTOS
Model Year: 2023
Summary
In April 2025 my vehicle had a recall (1: SC336 or 25V099), I brought it into a Kia dealership, they said it failed the test, and needed a new engine (i was without a vehicle for weeks, dealership said they did not have any loaners until after 14 days). They then call back weeks later saying the test was faulty, and i could have my car back. They said to keep an eye on it if there are any issues regarding the recall to come back. One morning i started my car, and was driving luckily in a 30mph, my car started to shake, would not speed up/move much, the check engine light came on, almost coming to a complete stop in the middle of a busy road. I was able to move it to the side, turn it off for a bit, once turned back on it was fine. My father who has a background in automotive mechanics checked the oil and noticed there was barely in it- (although just having it been changed) which looks like the oil consumption is fast and going somewhere. I immediately took it to a Kia dealership and they said I would have to go through a whole oil consumption test but it would not be a guarantee fix for engine replacement due to me not going to a dealership, or oil change business. Although my father who changes it, has all the receipts of oil purchase and capability of changing it himself. My oil is changed always in the proper timeline/miles. Which i have a alert on my car to notify me of this. I have noticed the kia does not give an alert when there is "low" oil. I have to drive around with extra oil, and check it almost daily just incase. I am worried that it will stop again but on a busy highway and result in a accident. I am concerned that the recall test was faulty and is resulting in major car issues, for something that is not even that old. As of yesterday i turned my car on and it was shaking and the engine light came on. I have not turned it on since, i will be returning to the dealership today.
Read More...NHTSA ID Number: 11719831
Complaint Date: 2026-02-23
Fail Date: 2026-01-26
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: CAMRY
Model Year: 2025
Summary
I am reporting new issues with my 2025 Toyota Camry that started immediately after the dealer completed the rear-camera recall service. 1. Right-Side Wheel Housing / Suspension Problem Since the recall, the right side of the car makes a loud noise whenever I drive over small bumps or uneven roads. It may be related to the shock absorber possibly leaking fluid, but the exact cause is UNKNOWN. •The part is available for inspection. •This raises a safety concern because it affects stability and may indicate a failing suspension component. •No warning lights appeared. 2. Infotainment Screen Glitch / Electrical Issue After the recall work, the infotainment screen began glitching every time I start the vehicle, and while driving it sometimes shows a large red line across the entire screen. •The issue happens randomly but consistently. •It is distracting and may indicate an electrical or software malfunction caused during the recall repair. •No warning messages appeared before the screen failure. 3. Inspection Status The vehicle has NOT yet been inspected for these new issues by Toyota or any third party. The problems did not exist before the recall and began immediately afterward, although the exact cause is UNKNOWN. I request a full investigation and inspection for safety concerns.
Read More...NHTSA ID Number: 11719830
Complaint Date: 2026-02-23
Fail Date: 2026-01-16
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: CHRYSLER
Vehicle Model: PACIFICA
Model Year: 2023
Summary
Several times (6) received a "pull over safely" message while on interstate at 60-75 mph. In addition check engine light comes on. Have taken to dealership for service and after 7 weeks they still have not be able to fix. Vehicle is completely inoperable at this point and am getting no support from Chrysler.
Read More...NHTSA ID Number: 11719829
Complaint Date: 2026-02-23
Fail Date: 2025-08-23
Manufacturer Name: General Motors, LLC
Vehicle Make: BUICK
Vehicle Model: ENVISTA
Model Year: 2024
Summary
The contact owns a 2024 Buick Envista. The contact stated that while driving at various speeds, the instrument cluster and the infotainment system went blank. The vehicle was taken to the dealer on several occasions, and the contact was informed that no cause for the failure was found. Additionally, the vehicle failed to start and made an abnormal sound while struggling to start. The vehicle was towed to the dealer. The vehicle was not yet diagnosed or repaired. Upon investigating the issue, the contact related the failure to NHTSA Campaign Number: 23V744000 (Electrical System); however, the VIN was not included in the recall. The dealer printed a copy of the recall information to add to the diagnostic report. The manufacturer was notified of the failure, and a case was filed. The failure mileage was approximately 45,882.
Read More...NHTSA ID Number: 11719828
Complaint Date: 2026-02-23
Fail Date: 2025-02-01
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: C-HR
Model Year: 2018
Summary
The contact owns a 2018 Toyota C-HR. While at a stop, the vehicle vibrated abnormally without warning. The vehicle was taken to a dealer, but no cause for the issue was found. While operating the vehicle, there was an abnormal whining sound coming from the vehicle, with the message "Service Engine Soon" displayed. The vehicle was taken back to the dealer, where a diagnostic test revealed a failure with the ball bearings inside the CVT. The contact was informed that the transmission and the torque converter needed to be replaced. The manufacturer was contacted and offered to cover half of the cost of the repair. The transmission and torque converter were replaced, and the vehicle was repaired. The contact was provided with a case number from the manufacturer. The failure mileage was approximately 70,000.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.