NHTSA ID Number: 11719857
Complaint Date: 2026-02-23
Fail Date: 2004-05-24
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: FRONTIER
Model Year: 2000
Summary
The contact owns a 2000 Nissan Frontier. The contact received notification of NHTSA Campaign Number: 04V230000 (FUEL SYSTEM, GASOLINE); however, the part to do the recall repair was not available. The contact was unable to register the vehicle with an open recall. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719856
Complaint Date: 2026-02-23
Fail Date: 2026-02-09
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2017
Summary
While driving the vehicle the passenger side of my rear window shattered due to the rear defroster circuit overheating. I brought the vehicle into my local Chevrolet Cerified dealership to examine - they stated that my vin number is not included in the wide spread recall affecting over 150k vehicles having the same exact issue. I did call GM and she told me how the recall could only be specific to vehicles manufactured at certain locations, or many other factors could lead to my truck not being covered. My vehicle has the power sliding center window - I have researched and have seen a ton of vehicles with this same rear window have the exact same issue as I did. Even the same side breaks. I don't understand how mine is not covered under the recall so many others are. This currently has not been fixed - I am concerned that the same issue will occur even after getting it fixed. I feel it should be not only covered under the recall, but the faulty part causing the issue should be replaced just as it has been with all the covered vehicles. I am asking for this to be reviewed further and expanding the vehicles covered under this recall. It is a very unsafe problem that can cause fire and injury. I don't know how bad this could have been if someone were sitting in the back seat when this happened.
Read More...NHTSA ID Number: 11719855
Complaint Date: 2026-02-23
Fail Date: 2025-02-23
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: JOURNEY
Model Year: 2019
Summary
The contact owns a 2019 Dodge Journey. The contact stated that the camera was intermittently blank while reversing. No warning lights were illuminated. The contact received notification of NHTSA Campaign Number: 25V552000 (Back Over Prevention). The driver had difficulty turning his head to check for vehicles or objects behind the vehicle. The local dealer was contacted and confirmed that the part was not available for the repair. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but there was no response. The failure mileage was approximately 137,000.
Read More...NHTSA ID Number: 11719854
Complaint Date: 2026-02-23
Fail Date: 2026-01-15
Manufacturer Name: Mazda Motor Corp.
Vehicle Make: MAZDA
Vehicle Model: CX-50
Model Year: 2025
Summary
Mazda CX-50 at 22000 miles CV joint on passenger side making clicking sound under moderate acceleration. Scheduled service with dealer on 1/28 received appointment date of 3/2 for inspection and possible repair.
Read More...NHTSA ID Number: 11719853
Complaint Date: 2026-02-23
Fail Date: 2026-02-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: RANGER
Model Year: 2019
Summary
he 2019 Ford Ranger the VIN [XXX] , the driver’s side AC only blows hot due to the climate control issue addressed in Fords service bulletin SSM 51313. This is a known issue with the early production model of the Ranger, hence the service bulletin SSM 51313. It is my belief that faulty parts were used on the early model Rangers and instead of a recall or extending the warranty on this issue only issued a service bulletin was put out. I am writing to have the Ford MOCO issue the proper recall or cover repairs under and extended warranty. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719852
Complaint Date: 2026-02-23
Fail Date: 2025-10-22
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2016
Summary
Beginning in late October 2025, my 2016 Jeep Cherokee North Edition began experiencing a recurring electronic shifter and transmission malfunction. The vehicle displays a “Service Shifter” warning (with an A! with a circle arrow and the check engine light is on) and shakes violently upon shifting; it's straight up psychologically unnerving. This issue creates a significant safety hazard because the vehicle may not shift accordingly, consequently increasing the risk of unintended vehicular movement and ultimate loss of control. I previously brought the vehicle to a certified Chrysler/Jeep dealership (Big O’ Dodge Chrysler Jeep, Laurens Rd., Greenville, SC) approximately 13 months earlier for mechanical issues while under warranty. At that time, repairs were completed and I was told no additional mechanical concerns were present. The shifter malfunction began after my extended warranty expired (after 20,000 miles). Since the problem began, I have taken the vehicle to a mechanic multiple times. During each visit, a diagnostic scan tool indicated cylinder misfires: First visit: cylinder #1 misfire — I paid for repairs/replacement. Second visit: cylinder #2 misfire — I paid for additional repairs. Third visit: cylinder #3 misfire — I was advised further repairs would be costly and to consider replacing the vehicle. Despite having recently spent $1,500 on these repairs, the shifting malfunction and safety issues have persisted/have not been resolved. I have been unable to safely operate the vehicle for approximately four months due to the risk associated with the transmission/shifter malfunction. I have learned that similar (2014-2017) Jeep Cherokees have been recalled for similar electronic shifter defects. However, my VIN was not included in the recall. Because this defect poses a serious safety risk and appears consistent with known issues, I am requesting an investigation into this failure. The vehicle is available for inspection upon request.
Read More...NHTSA ID Number: 11719851
Complaint Date: 2026-02-23
Fail Date: 2026-02-17
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: TUNDRA
Model Year: 2025
Summary
The contact owned a 2025 Toyota Tundra. The contact stated that while driving at approximately 60 MPH, there was an object in the road that he attempted to swerve around; however, the lane-keeping assist feature independently activated, causing the vehicle to jerk off the road, down the median, and crash into a ditch. The vehicle was not drivable. No warning lights were illuminated. The air bags were deployed. The contact could not recall if the vehicle was towed or not. The contact stated that his head crashed into the door frame and knocked him unconscious; the contact stated that when he woke up, he was in an ambulance on its way to the hospital. The contact discovered at the hospital that he had five broken ribs and bruises spread all over his body. Medical treatment was needed, and the contact was in the hospital for a few days. A police report was filed. The manufacturer was notified of the failure. The failure mileage was approximately 5800.
Read More...NHTSA ID Number: 11719850
Complaint Date: 2026-02-23
Fail Date: 2025-08-07
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: TAHOE
Model Year: 2024
Summary
The contact owns a 2024 Chevrolet Tahoe. The contact stated that on four occasions while in reverse (R), the "Service Transmission" message was displayed, and the vehicle failed to reverse. The contact was able to shift into drive(D). The vehicle was taken to a dealer on four separate occasions, where it was diagnosed and determined that the transmission shifter had failed and needed to be replaced. The vehicle was repaired all four times, but the failure reoccurred. The manufacturer was not notified of the failure. The failure mileage was approximately 4,293.
Read More...NHTSA ID Number: 11719849
Complaint Date: 2026-02-23
Fail Date: 2026-02-23
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2014
Summary
The electric power steering module failed while driving and could have resulted in an accident. After searching online there are Alot of similiar cases with the same model truck and is a serious safety concern.
Read More...NHTSA ID Number: 11719848
Complaint Date: 2026-02-23
Fail Date: 2026-02-21
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SORENTO
Model Year: 2022
Summary
The contact owns a 2022 Kia Sorento. The contact stated that while driving at an undisclosed speed, the sunroof exploded without impact. There was no injury sustained. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was 86,296.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.