NHTSA ID Number: 11719807
Complaint Date: 2026-02-23
Fail Date: 2026-01-29
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2024
Summary
ICCU failure, which made the car stop dead in the road with no way to move it because the car shifts into Park when powered down (there is no way to shift into Neutral without power).
Read More...NHTSA ID Number: 11719806
Complaint Date: 2026-02-23
Fail Date: 2025-06-01
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SEQUOIA HYBRID
Model Year: 2024
Summary
When driving down steep grade, (mountain pass) front brakes will begin to vibrate violently. Very scary when driving the vehicle. When you reach the bottom of the steep incline, the brakes begin to function normally again. I have had this happen on 3 different occasions. I informed the dealership of this but they didn't see anything abnormal when they inspected the brakes. The did not attempt to reproduce the problem as there are no extended steep grades nearby to drive down. There were no warning lamps displayed.
Read More...NHTSA ID Number: 11719805
Complaint Date: 2026-02-23
Fail Date: 2026-02-20
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2021
Summary
The contact owns a 2021 Chevrolet Silverado 1500. While driving 43 MPH, the message "Brake Failure" was displayed. The contact then lost control of the vehicle, and the vehicle drove from the right side to the left side of the road, the vehicle drove off the road and crashed into a ditch before coming to a stop. The driver had not sustained any injuries. There was no property damage. The air bags did not deploy. The check engine, the ABS and several unknown warning lights were illuminated after the failure. A tow truck driver who was also a mechanic inspected the vehicle and informed the contact that the driver's side front suspension had fractured from the upper ball joint and the wheel was folded in underneath the vehicle. The vehicle was towed to the dealer, where it was being diagnosed. A Police Report was filed. The manufacturer was not notified of the failure. The failure mileage was approximately 98,000.
Read More...NHTSA ID Number: 11719804
Complaint Date: 2026-02-23
Fail Date: 2025-12-01
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2021
Summary
Vehicle began to slip or shift hard when putting it in gear or coming to a stop. The next morning the vehicle would not move when put in drive or reverse.
Read More...NHTSA ID Number: 11719803
Complaint Date: 2026-02-23
Fail Date: 2026-02-06
Manufacturer Name: Lucid USA, Inc.
Vehicle Make: LUCID
Vehicle Model: AIR
Model Year: 2025
Summary
On 6 February 2026 on or about 1410 hours I was traveling west on Ledbetter Blvd., Dallas, TX. Our pool into a restaurant driveway to purchase food in upon parking. I noticed a long line going from north to south on the driver side windshield of my Lucid air 2025. I inspected the windshield and I did not notice any major visible impact to the windshield although there was a very microscopic incision on the outside window surface. I contacted Lucid customer care and Lucid customer care had a technician to come and inspect the windshield. The technician stated he noticed a very very small impact to the windshield that you could not notice with the naked eye I stated to the Lucid technician, I strongly believe that the windshield has a defect because with an impact such as what he described in my opinion should have never caused the damage to the front windshield that it did. I informed the Lucid technician that I will be filing a complaint with the national highway, and transportation administration for pertaining to this windshield incident on my Lucid air..
Read More...NHTSA ID Number: 11719802
Complaint Date: 2026-02-23
Fail Date: 2024-02-16
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: PROMASTER
Model Year: 2017
Summary
Odometer Fraud. The contact purchased a 2017 Ram Promaster 1500. The vehicle was purchased on February 16, 2024. The contact stated that at the time of purchase, the mileage was 84,000. The vehicle was taken to Valvoline, where the odometer was reported in 2018 February 2023 at 346,000. The contact purchased a Carfax report, which indicated that the mileage was 346,544 in January 2023. In addition, the dealer was made aware of the discrepancy, and the contact was informed that the vehicle would be collected, and the sale would be voided; however, the down payment would not be returned.
Read More...NHTSA ID Number: 11719801
Complaint Date: 2026-02-23
Fail Date: 2026-02-21
Manufacturer Name: Daimler Vans USA, LLC
Vehicle Make: MERCEDES-BENZ
Vehicle Model: SPRINTER 2500
Model Year: 2018
Summary
The contact owns a 2018 Mercedes-Benz Sprinter 2500. The contact stated that while the vehicle was parked, the contact became aware of an electrical burning odor. Upon touching the steering wheel, the steering wheel was extremely hot. After the vehicle was driven, the steering wheel gradually cooled down. The owner expressed concerns that the air bag might inadvertently deploy due to the heat. There were no warning lights illuminated. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 40,000.
Read More...NHTSA ID Number: 11719800
Complaint Date: 2026-02-23
Fail Date: 2025-10-15
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ECOSPORT
Model Year: 2020
Summary
The contact owns a 2020 Ford EcoSport. The contact received notification of NHTSA Campaign Number: 23V905000 (Engine and Engine Cooling). The contact stated that when the vehicle was taken to a dealer for the recall repair, it was determined that the oil pump drive belt had disintegrated and needed to be replaced; however, the part to complete the recall repair was not yet available. The manufacturer was not made aware of the issue. The failure mileage was approximately 33,000.
Read More...NHTSA ID Number: 11719799
Complaint Date: 2026-02-23
Fail Date: 2025-10-07
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SIENNA HYBRID
Model Year: 2025
Summary
I am told not to drive the vehicle while putting anyone in the second row (it is a mini van and I have young kids). Still no fix available for almost 6 months - Paying interest on a vehicle I cannot safely drive is wrong.
Read More...NHTSA ID Number: 11719798
Complaint Date: 2026-02-23
Fail Date: 2026-02-23
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-550 SD
Model Year: 2021
Summary
The contact owns a 2021 Ford F-550. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.