NHTSA ID Number: 11719297
Complaint Date: 2026-02-20
Fail Date: 2025-07-25
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SIENNA
Model Year: 2017
Summary
In July of 2025 my 2017 Sienna started making a whine noise. Took it to mechanic and he stated it was likely coming from transmission but recommended we take it to Toyota dealership to confirm. So we took it to Toyota and sure enough they said the transmission was failing. They said it was due to high mileage but it only had just over 150,000 at time of incident. After doing some research on line and talking with other Sienna owners I believe our Sienna should fall under the UA-80 recall.
Read More...NHTSA ID Number: 11719296
Complaint Date: 2026-02-20
Fail Date: 2026-01-01
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: RIDGELINE
Model Year: 2023
Summary
There is constant water intrusion on the driverside headlight causing poor headlamp performance. I have reported the issue to a dealer for a warranty claim and was told that it is normal for water to be inside the headlight housing. If this is the case than I believe there is potential for a safety hazard. Issue was escalated to Honda Customer Service who initially offered to help get the repair done under warranty and then changed their tune and told me they wouldn't intervene and my only other option was to take it to another dealership to get a second opinion. I believe than based on Manufacturer Communications on this website (11000278 & 11000270) that this is a known issue and owners are being gaslighted into thinking its normal.
Read More...NHTSA ID Number: 11719295
Complaint Date: 2026-02-20
Fail Date: 2026-02-20
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2018
Summary
The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated the ABS and traction control warning lights were illuminated and were no longer operable. The dealer was contacted, and it was confirmed that the parts was not yet available. The contact spoke with another dealer, Mark's Discount Truck & Auto Sales (214 Rockingham Rd, Londonderry, NH 03053); and it was confirmed that the part was not yet available. The manufacturer was made aware of the issue, and it was confirmed that the part was not yet available. The failure mileage was 40,872.
Read More...NHTSA ID Number: 11719294
Complaint Date: 2026-02-20
Fail Date: 2025-10-23
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2025
Summary
I am reporting Hyundai Motor America’s failure to remedy two active safety recalls on my 2025 Hyundai Palisade (VIN: [XXX] ) within a reasonable timeframe, despite multiple attempts to have the vehicle repaired. My vehicle has two open safety recalls involving critical occupant protection systems, including seat belt buckle assemblies that may fail to latch properly and a third-row occupant safety defect that increases the risk of injury in the event of a crash or rollover. On October 23, 2025, I brought my vehicle to the Hyundai dealership specifically to have the recall defects repaired. At the time of drop-off, I clearly informed the dealership that the purpose of the visit was for recall repairs. However, the dealership labeled the visit as a “maintenance appointment” instead of properly documenting it as a recall repair visit. The recall defects were not repaired. I returned to the Hyundai dealership again on February 18, 2026, after being promised that the recall repairs would be completed. Once again, Hyundai failed to repair the safety defects, and the recalls remain unresolved. It is now February 20, 2026, more than four months since I first presented the vehicle for recall repair, and Hyundai has failed to remedy these critical safety defects or provide a clear timeline for repair. These defects involve essential safety systems, including seat belts and third-row occupant protection. I have four children who regularly occupy the rear seating areas, and I am deeply concerned about their safety. Hyundai’s failure to repair these safety recalls has placed my family at risk. Because Hyundai has failed to repair the vehicle within a reasonable timeframe, I am requesting NHTSA investigation and assistance. I am also requesting that Hyundai provide trade assistance, replacement, or buyback so that I can obtain a safe vehicle for my family, at no cost to me, due to Hyundai’s inability to remedy these safety defects. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719293
Complaint Date: 2026-02-20
Fail Date: 2026-02-09
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: MURANO
Model Year: 2025
Summary
I was traveling out of state when the climate control panel on the vehicle stopped working. I was not able to control heat, defroster or air flow. Took to dealership. They verified it was the control panel, and the part was ordered but it's on backorder with no ETA when it may arrive and the vehicle repaired.
Read More...NHTSA ID Number: 11719292
Complaint Date: 2026-02-20
Fail Date: 2026-02-15
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2023
Summary
I was driving home from lunch with my wife. A "Check electrical system" alert came up, followed shortly by an urgent beeping with a "Stop vehicle and check power supply." We were able to pull into a parking lot. We called our insurance company for a tow, which showed up two hours later. They took it to the nearest Hyundai dealership. It took three days to diagnose the issue as an ICCU failure, which appears all too common with Ioniq 5s. There's a national backlog on the replacement part, so my car will likely be in the shop for a month to six weeks. A six-week old AGM battery also died. Hyundai wants me to pay to replace it.
Read More...NHTSA ID Number: 11719291
Complaint Date: 2026-02-20
Fail Date: 2026-02-15
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2024
Summary
On February 15 Sunday night my 2024 Accord was broken in by thieves. Honda’s door lock system was so easy that robbers were able to hack it and open the driver door easily. After which steering wheel airbag was stolen. There was another Honda Accord 2025 model also parked which belong to my family member, was also hit by same thieves and was a victim of door brake in and steering wheel airbag stolen. I would like to file complaint against Honda’s week security system which allowed the thieves to easily brake into our Vehicles. Upon checking the internet I came across videos of how easy it is to steel the airbags since it only requires 2 small flathead screw drivers to unlatch the steering wheel air bag. During my conversation with police who files my report mentioned that “ honda is being hit with these cases a-lot and honda vehicles can easily be started with wifi system”. I spoke to the service advisor at Honda who is fixing my car about this issue, he responded saying “ there is nothing we can do. The best thing you can do is put steering wheel lock bar on it”. At this point I don’t feel safe having Honda vehicle at all. What can prevent them from not breaking to my car again after being fixed? At this point it is a high risk for me for constantly paying insurance deductibles and chances of insurance premiums increments and worst of all a constant stress every night of being hit again.
Read More...NHTSA ID Number: 11719290
Complaint Date: 2026-02-20
Fail Date: 2026-02-19
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: CAMRY
Model Year: 2025
Summary
The hybrid propulsion system in my Toyota Camry Hybrid malfunctioned. The vehicle displayed multiple warning messages, including “Hybrid System Malfunction” and other system failure alerts. The accelerator pedal stopped responding, and the vehicle lost propulsion while driving at highway speed. The vehicle would not restart after coming to a stop. The vehicle has been towed and is available for inspection upon request. The vehicle lost power while I was traveling at highway speed during severe weather conditions (tornado and thunderstorm warnings). The car began rattling and shaking, then the accelerator stopped responding, and the vehicle gradually decelerated despite pressing the gas pedal. I was forced to activate hazard lights and maneuver to the shoulder. Multiple large trucks were traveling at high speed and did not immediately move over, coming dangerously close to striking my disabled vehicle. Because of the severe weather and approaching storm conditions, I was stranded on the highway in a vulnerable position. The sudden loss of propulsion created a significant risk of a high-speed rear-end collision. The vehicle was towed after the incident. It has not yet been confirmed whether the dealer has reproduced the failure. The malfunction occurred suddenly while driving and has not been intentionally reproduced by me. The vehicle would not restart at the time of the incident. The vehicle was towed following the incident. It has not yet been inspected by police or insurance representatives. Inspection by a Toyota dealer/manufacturer representative is pending (or currently in progress, if applicable). Approx. 15 minutes before reaching my destination, the vehicle began rattling and shaking unexpectedly while driving at highway speed. Shortly after, the rattling stopped, but the accelerator pedal stopped responding and the vehicle began decelerating. Multiple warning messages then appeared, including “Hybrid System Malfunction” and other system failure.
Read More...NHTSA ID Number: 11719289
Complaint Date: 2026-02-20
Fail Date: 2026-02-10
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: TERRAIN
Model Year: 2017
Summary
I had a message flash that said the power to the engine was reduce. Next message said check stabilink ( or something similar).. it said drive with caution. I live 2 mins from my job I drove home and pulled in the driveway I then felt the car act like it wanted to shake. This was on 2-10-26 I contacted onstar asked them to run a diagnostic. The codes that came back P0016 p0089 p228D are very well known codes with many people with the same vehicle/engine that have had to replace the engine. The engines have known issues had I known that maybe I could have replaced a part or two or three or four to have a stable vehicle now my vehicle is currently at GMC DEALER since Tuesday morning actually had it towed there monday night. I called Wednesday evening they still wasn't sure the "issue". Thursday I wait until about 1pm spoke with John he said well we are pretty sure you need a new engine the mechanic is checking a few more things the car has no pressure. About a hr later I get a email and a call saying the timing chain skipped and something about the pistons and the valves and I need a new engine . John called me and said well.Ill tell you what we will offer you a brand new Engine for the same price as a rebuild plus you get 3yrs 300 thousand warranty for 10,944. Give or take a few dollars. We'll first I paid like 15,500 for the car that I just litetally paid off like Jan 12026. I really feel like had GMC Made buyers aware that the vehicle has defective parts/engines buyers could replace parts or GMC should be held accountable. I started googling the engine and found out that there is a class action lawsuit and a recall on " certain" 2017 terrains depending on the vin. Same issues my car is having but its saying my car has no recall.
Read More...NHTSA ID Number: 11719288
Complaint Date: 2026-02-20
Fail Date: 2026-02-13
Manufacturer Name: Volkswagen Group of America, Inc.
Vehicle Make: AUDI
Vehicle Model: A3
Model Year: 2017
Summary
While driving at highway speeds, a warning light appeared as well as an alert indicating the car was limited to no more than 4000rpm. After coming to a stop, a strong smell of gasoline was noticed in the passenger compartment. Continued driving home uneventfully but the strong smell of gas persisted. The next day I drove the car to a mechanic. Their inspection notes the following: The technician verified the customer concern of a fuel smell. He performed a fault scan, finding codes for low fuel pressure. He inspected the vehicle, finding a major fuel leak under the intake manifold, most likely from a cracked fuel rail. The system is supposed to operate at 125 bar of fuel pressure, but is currently at 9-11 bar. The high pressure fuel pump is operating at 100% duty cycle, which means it has overheated and been damaged. Metal shavings from the fuel pump then ends up inside of the injectors, ruining them. The low pressure fuel pump may be ok, but it is unclear at this time. **RECOMMEND REPLACING FUEL RAIL, HIGH PRESSURE FUEL PUMP, INJECTORS WITH SEALS, AND PRESSURE SENSOR **MAY NEED LOW PRESSURE FUEL PUMP They also noted that the leaking fuel could cause a fire hazard. The fact that this fuel leak happened at only 98,750 miles and that the car continued to be drivable with fuel spraying all over the engine compartment is extremely concerning.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.