NHTSA ID Number: 11719287
Complaint Date: 2026-02-20
Fail Date: 2026-02-12
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: PROMASTER
Model Year: 2021
Summary
I purchased the vehicle above used on 4/22/2024 with roughly 70,000 miles on it. At 121,000 miles I lost the reverse gear in the transmission and the vehicle displayed 2 code P0736 and P0792. I call my local Chrysler dealership and inform him of the situation, and the service manage advise me of a recall 44A / NHTSA 23V-301 and asks for the VIN. He tells me that the recall has been completed on the vehicle and the cost to fix (replace the transmission) the vehicle will cost me about $4,000.00. I read the recall notice, and it states the vehicle effected had roughly 133,000 miles. The recall must have been closed by the previous owner but that does not change the fact that the manufactures initial repair did not cure the problem being that my vehicle had the catastrophic failure close to when the manufacture stated the problem in the recall. There are many owners of the same vehicle out there that will attest to the transmission failure on these vehicles. I would hope your department will take a serious look into this matter and hold the manufacture accountable and reimburse the cost of the repairs to the owners.
Read More...NHTSA ID Number: 11719286
Complaint Date: 2026-02-20
Fail Date: 2025-04-17
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2025
Summary
After 45 days of purchasing the SUV I notice the front grille was checking and flaking. Report it to the dealership and Hyundai. They said it was caused by "out influence". So they didn't cover it. After several attempts back and forth with dealership they finally agreed to cover the replacement front grille. This is an on going issue with these grilles. The new grille is starting to do the same thing. Many Hyundai palisade customers on the forums are talking about this issue!
Read More...NHTSA ID Number: 11719285
Complaint Date: 2026-02-20
Fail Date: 2026-01-19
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2025
Summary
When I was pulling out of my driveway heading out of the neighborhood. Approaching the stop sign I applied my SUV brakes and it fail. I had to push the neutral button to take it out of gear. My current speed was approximately 25 to 30 mph. I was heading towards a ditch and almost crashed into the ditch. Took the car to the dealership. The dealership inspected and the intake vacuum line that controls the brakes fail part was defective. Dealership had to order the part. It took them 20 days to get my SUV repaired and back to me. Part was covered under warranty.
Read More...NHTSA ID Number: 11719284
Complaint Date: 2026-02-20
Fail Date: 2026-02-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2011
Summary
The contact related the failure to NHTSA Campaign Number: 19V075000 (Power Train); however, the VIN was not included in the recall. The manufacturer was made aware of the failure. The failure mileage was approximately 250,000.
Read More...NHTSA ID Number: 11719283
Complaint Date: 2026-02-20
Fail Date: 2026-02-15
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2024
Summary
Spongy brakes, constant pumping of brakes to aid in stoping but check this out! In 4x4 mode Low 4x4 brake failure is almost 90%! I must mash the brakes as the brake peddle falls to the floor, then wait, brace and pray truck comes to come to a stop!!!!
Read More...NHTSA ID Number: 11719282
Complaint Date: 2026-02-20
Fail Date: 2026-02-19
Manufacturer Name: Daimler Vans USA, LLC
Vehicle Make: MERCEDES-BENZ
Vehicle Model: SPRINTER 2500
Model Year: 2022
Summary
Mercedes dealership refused to replace ism module and I'm driving with blank instrument panel! No rmp no mph no gas gauge no milage nothing! This vehicle is my only source of income as I'm a delivery driver! It's my only vehicle! I need this fixed now or I can't pay my bills! This part is recalled and I expect them to fix it!
Read More...NHTSA ID Number: 11719281
Complaint Date: 2026-02-20
Fail Date: 2026-02-20
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: C-HR
Model Year: 2019
Summary
CVT transmission bearing noise
Read More...NHTSA ID Number: 11719280
Complaint Date: 2026-02-20
Fail Date: 2026-02-11
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: COROLLA
Model Year: 2021
Summary
While in a parking lot, the clutch pedal suddenly lost all pressure and remained stuck to the floor, rendering the vehicle unable to shift gears. While this occurred at parked car , a sudden loss of gear engagement at highway speeds would have caused a catastrophic loss of motive power in high-speed traffic. Furthermore, this vehicle utilizes a shared reservoir for both clutch and brake fluid. A major failure of the clutch slave cylinder seals can lead to rapid fluid loss or air ingestion into the shared hydraulic system, potentially compromising braking performance. The dealership confirmed the internal clutch slave cylinder failed prematurely at only 38,000 miles. Because the part is internal to the housing, a full transmission removal was required, resulting in a total repair cost of $5,600. Despite the safety implications of a shared hydraulic failure and the extremely low mileage, Toyota has refused to cover the full cost. No warning lights or symptoms appeared prior to this sudden failure.
Read More...NHTSA ID Number: 11719279
Complaint Date: 2026-02-20
Fail Date: 2026-01-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EDGE
Model Year: 2019
Summary
This is a 2019 Ford Edge in great condition. I just purchased the vehicle with roughly 90000 miles on it. After roughly 2 weeks of driving, I noticed the vehicle struggles to get up to speed, and the gears shift roughly, especially after a cold start. Additionally, while driving, the gears would struggle to downshift, staying at a higher RPM than it should, such as being stuck at 4000 RPM while driving 30mph, and it would stay like this for about 1-2 minutes. Additionally, from time to time, the reverse gear will not engage at all, this is a major safety concern, God forbid I am somewhere I need to back out from and there is obstruction in the front, only God knows what trouble I would be in. There have been recalls for such cars. It is unfortunate that Ford has not opened an active recall for others with this issue. Please help, this car costs too much, and I fear for my wife and newborn's safety with transmission issues.
Read More...NHTSA ID Number: 11719278
Complaint Date: 2026-02-20
Fail Date: 2025-07-09
Manufacturer Name: BMW of North America, LLC
Vehicle Make: BMW
Vehicle Model: X3
Model Year: 2011
Summary
I had my car towed into bmw dealership for a vanos recall repair,it went in for the repair the repair was "done" but before picking it up they told me they were unable to qc/start my engine to verify the repair claiming that because my camshaft position sensor was removed (it was removed to ultimately figure out it was the vanos system that failed)and that my car had no battery at the time of the repair they could and would not start my engine to verify the repair and that they turned it over by hand only,upon them releasing the car back to me I brought a battery and started my car and left the dealership within ten miles my engine failed and locked up due to oil starvation,I had it towed back immediately and explained what happened,and they refuse to take any responsibility for my car failing on the road while driving cause my engine to smoke and push the smoke into the cab mid traffic,this happened In July of 2025 and I am still going back and forth trying to get them to take responsibility and replace my engine,they did not follow proper procedures to ensure my vehicle was safe for pickup violating safety standards
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.