NHTSA ID Number: 11719137
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: TUCSON
Model Year: 2023
Summary
All systems warning lights came on
Read More...NHTSA ID Number: 11719136
Complaint Date: 2026-02-19
Fail Date: 2026-02-17
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2017
Summary
While driving down the road all of a sudden vehicle slams then shifts down indicator lights for gear selection starts flashing. It has happened 4 times so far this week February 17, February 19 of 2026.
Read More...NHTSA ID Number: 11719135
Complaint Date: 2026-02-19
Fail Date: 2026-01-12
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2025
Summary
The contact owns a 2025 Hyundai Palisade. The contact stated that while driving with the cruise control set to 72 MPH, the vehicle unintendedly decelerated, and the vehicle came to a stop. The accelerator pedal was depressed; however, the vehicle failed to respond. There was no warning light illuminated. There was an abnormal red light illuminated, and an alarm was activated. The vehicle was taken to a local dealer, where it was diagnosed; however, the failure could not be duplicated. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 75,000.
Read More...NHTSA ID Number: 11719134
Complaint Date: 2026-02-19
Fail Date: 2026-02-18
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: BRONCO
Model Year: 2025
Summary
I have experienced three total brake failures in my 2025 Ford Bronco. During the most recent incident on 2-18-2026 the brake pedal traveled completely to the floorboard, requiring extreme force and multiple pumps to stop the vehicle. This appears to be the exact failure described in Ford Recall 25S77 (NHTSA Campaign 25V488) regarding the Electronic Brake Booster (EBB) module. The vehicle was presented to Suntrup Ford twice previously for this issue, but the defect was not corrected. I am reporting a life-threatening safety failure. After February 18th 2026 brake failure I had bronco towed to Suntrup Ford in Kirkwood Missouri and that's where it will stay. I am too frightened to drive it again.
Read More...NHTSA ID Number: 11719133
Complaint Date: 2026-02-19
Fail Date: 2024-11-19
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2018
Summary
The contact called on behalf of the owner of a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the ABS warning light was illuminated. The contact called the local dealer and confirmed that the part to do the recall repair was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. No assistance was provided. The failure mileage was approximately 6,500.
Read More...NHTSA ID Number: 11719132
Complaint Date: 2026-02-19
Fail Date: 2026-02-08
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SPORTAGE
Model Year: 2020
Summary
Car was driving, stopped at a stoplight, never moved again. 3 lights came on, Check Engine, Check Oil (Which had been serviced previously by a month and a half), and Check Battery. Bob Sight Kia has stated Engine issues associated with the rods failing and the starter not functioning due the the manifold, I am uncertain to the technical terms. It was late at night, the area only semi lit up and I had to wait for a tow in unsafe conditions as I was stuck in a turn lane. Prior to the failure, no issues. This is my only means of transport as a waitress, I had recently moved into this area and plan to move again at the end of year, so my car is much needed. From the theft issues of this car to the mechanical issues over the last year, I can honestly say I will not be buying a Kia again. What I need to know now is has the threshold been met by the standards you have set through complaints by consumers like myself and the manufacturer information that a recall or a means of financially assisting this situation exist yet? The repairs quoted are literally almost half of what I owe on the car left and I do not know what to do, but am hoping to hear from you.
Read More...NHTSA ID Number: 11719131
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2022
Summary
The contact owns a 2022 Jeep Grand Cherokee. The contact received notification of NHTSA Campaign Number: 25V741000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719130
Complaint Date: 2026-02-19
Fail Date: 2026-02-18
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2022
Summary
The vehicle is subject to Safety Recall N252494001 (NHTSA Campaign 25V-274) due to manufacturing defects in the engine crankshaft and connecting rod bearings. • Component/System Failed: The 6.2L V8 (L87) engine crankshaft and connecting rod assembly. The engine is available for inspection upon request. • Safety Risk: The defect can cause catastrophic engine damage and sudden loss of propulsion while driving, significantly increasing the risk of a crash. • Dealer/Manufacturer Confirmation: The problem was confirmed via the issuance of Safety Recall N252494001. A dealership inspection was performed previously as part of the recall. • Warning Signs/Symptoms: Common symptoms include engine knocking, check engine lights, and hesitation before sudden failure. The Issue with the Remedy: Federal law (49 U.S.C. § 30120) requires manufacturers to remedy safety defects "without charge". As a permanent safety remedy for this defect, GM has mandated a switch from 0W-20 to 0W-40 (dexosR) oil for the life of the engine to prevent bearing failure. However, the dealership and manufacturer are refusing to provide this mandated safety spec change without an ongoing $85 surcharge per oil change. While they performed the initial "inspection" oil change for free, they are now using the recall-mandated spec change to create a financial burden on the consumer. Because 0W-40 is now the mandatory factory requirement to prevent the safety defect, charging a premium for it constitutes a failure to provide the recall remedy "without charge." General Motors refuses to offset this cost, effectively penalizing the owner for a manufacturer safety defect. The dealership is also failing to honor my Platinum Wrap warranty and GM Prepaid service contract to perform the continued oil changes without additional charges.
Read More...NHTSA ID Number: 11719129
Complaint Date: 2026-02-19
Fail Date: 2026-01-23
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2022
Summary
On January 23, while driving, the vehicle suddenly shut down and stopped working without warning. I attempted to restart the vehicle several times, but it would not start. Smoke was coming from the engine area, and the vehicle was completely disabled on the road. I was stranded on the roadside until approximately 11:30 PM, waiting for a tow truck to arrive. The vehicle had to be towed and taken to the dealership. The dealership later confirmed that the engine wiring harness had burned and failed. The failed component is currently at the dealership and is available for inspection. This sudden shutdown created a serious safety risk to me and other drivers due to loss of power while driving. The issue was not caused by misuse or modifications. The vehicle has since been inspected by the dealership and a manufacturer (Chrysler) representative.
Read More...NHTSA ID Number: 11719128
Complaint Date: 2026-02-19
Fail Date: 2025-12-01
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2018
Summary
My transmission failed at around 69,000 miles. This was confirmed by the dealership. I bought my vehicle from and was covered under warranty. I purchased my vehicle in 2019 from a Dodge dealership and it came with a 10 year hundred thousand mile warranty for the powertrain. The tech indicated that the torque converter failed sending metal fragments through the transmission, coolant lines and transmission cooler. There were no warning indicators only hard shifting clunking when shifting and shuttering at different speeds.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.