NHTSA ID Number: 11719127
Complaint Date: 2026-02-19
Fail Date: 2026-02-01
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: K4
Model Year: 2025
Summary
Engine Failure, Engine cooling and lost power
Read More...NHTSA ID Number: 11719126
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2025
Summary
The contact owns a 2025 Ram 2500. The contact received notification of NHTSA Campaign Number: 26V059000 (Exterior Lighting, Electrical System); however, the part to do the recall repair was not yet available. The dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719125
Complaint Date: 2026-02-19
Fail Date: 2025-11-30
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2019
Summary
The power transfer unit in my Jeep Cherokee 2019 Latitude failed and required a replacement, at significant cost (over $2000). It is my belief that Jeep’s recall campaign (ID - O1C) was too narrow and ought to have included my vehicle. I have called Jeep three times without a proper answer to my concern. The failure of the power transfer unit was publicly described as a safety issue and I was unable to drive the vehicle for nearly two months.
Read More...NHTSA ID Number: 11719124
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SUPRA
Model Year: 2021
Summary
The contact owns a 2021 Toyota Supra. The contact received notification of NHTSA Campaign Number: 25V636000 (ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719123
Complaint Date: 2026-02-19
Fail Date: 2026-01-13
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2021
Summary
The contact owns a 2021 Ram 1500. While driving 65 MPH in inclement weather and attempting to clean the windshield, the windshield washer fluid failed to spray onto the windshield. The contact was unable to see the road clearly and pulled over to the side of the road to inspect the vehicle. The contact became aware that the windshield washer fluid hose was cracked. The vehicle was taken to a dealer, where it was determined that the windshield washer fluid hose needed to be replaced. The manufacturer was notified of the failure, and a complaint was filed. The failure mileage was approximately 40,000.
Read More...NHTSA ID Number: 11719122
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2018
Summary
Driver display, dash, lights all shut off randomly! Bluetooth disconnects. Reconnects right away. Like if it has a short. Does this especially on long trips.
Read More...NHTSA ID Number: 11719121
Complaint Date: 2026-02-19
Fail Date: 2022-11-22
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2019
Summary
The contact owns a 2019 Jeep Cherokee. The contact stated that while driving 70 MPH, the transmission unexpectedly downshifted to first gear, and the vehicle failed to accelerate as needed while depressing the accelerator pedal. The vehicle was driven to an independent mechanic, where the contact purchased a new battery and had the battery replaced. After the battery replacement, the failure recurred with the messages "Service Stop/Start System" and "Check Engine" displayed. The failure persisted with several unknown warning lights illuminated. The vehicle was towed back to the independent mechanic, where the contact was informed that the battery needed to be replaced. The mechanic also replaced the transfer case and the rear differential. The manufacturer was notified of the failure but offered no assistance. The vehicle was not repaired. The failure mileage was approximately 80,000.
Read More...NHTSA ID Number: 11719120
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Subaru of America, Inc.
Vehicle Make: SUBARU
Vehicle Model: IMPREZA
Model Year: 2018
Summary
The contact owns a 2018 Subaru Impreza. The contact stated that while driving at an undisclosed speed, the engine overheated and the high-temperature warning light illuminated. The vehicle was towed to an independent mechanic, where it was diagnosed, and determined that an engine reseal had failed and needed to be redone. The vehicle was not repaired. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure, and a case was opened. The approximate failure mileage was 106,000.
Read More...NHTSA ID Number: 11719119
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: VENUE
Model Year: 2022
Summary
The contact owns a 2022 Hyundai Venue. The contact stated that while reversing into the driveway and parking the vehicle, there was an abnormal knocking sound and vibration in the steering wheel. The vehicle was taken to the dealer, where it was diagnosed with a steering shaft bolt failure. The dealer adjusted and tightened the steering bolt. The contact stated that the failure temporarily recurred 4 days later. The dealer was not contacted. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 43,200.
Read More...NHTSA ID Number: 11719118
Complaint Date: 2026-02-19
Fail Date: 2026-02-01
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: TRANSIT
Model Year: 2016
Summary
This complaint is specifically related to Ford Recall 16S32 / NHTSA Campaign 16V618000 regarding the High-Pressure Fuel Pump (HPFP) failure. My vehicle (VIN: [XXX] ) has experienced the exact mechanical failure described in this recall, resulting in metal debris throughout the fuel system and a sudden loss of engine power while driving. This created an immediate safety hazard on the road. Ford is currently denying assistance because my vehicle’s production date falls just one day (24 hours) outside the official recall window. It is mechanically impossible for a manufacturing defect present in the recalled batch to not exist in a vehicle produced only 24 hours earlier. I am requesting that NHTSA investigate this arbitrary 1-day exclusion. Ford should not be allowed to avoid responsibility for a known safety defect based on a marginal production date error, especially when the failure and the parts involved are identical to those covered under the recall INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.