NHTSA ID Number: 11718876
Complaint Date: 2026-02-18
Fail Date: 2025-06-18
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: HIGHLANDER
Model Year: 2019
Summary
The contact owns a 2019 Toyota Highlander. The contact stated that while driving at various speeds, there was an abnormal whining sound coming from the transmission. Later, while the contact’s wife was driving approximately 50 MPH, the vehicle went into LIMP Mode and decelerated unexpectedly. The contact diagnosed the vehicle and determined that there was a failure with the torque converter. The local dealer was notified of the failure, but no assistance was provided. The vehicle was not repaired. The manufacturer was not yet notified of the failure. The failure mileage was 128,000.
Read More...NHTSA ID Number: 11718875
Complaint Date: 2026-02-18
Fail Date: 2026-02-16
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: ELANTRA
Model Year: 2008
Summary
The contact owns a 2008 Hyundai Elantra. The contact stated that a week after the dealer performed the recall repair under NHTSA Campaign Number: 20V061000 (Service Brakes, Hydraulic); the contact was made aware that the brake lights had remained illuminated after the vehicle was parked and turned off. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 199,950.
Read More...NHTSA ID Number: 11718874
Complaint Date: 2026-02-18
Fail Date: 2025-09-30
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: LEAF
Model Year: 2022
Summary
My 2022 Nissan Leaf (VIN ending 558192) is affected by recall R25C8 (Lithium-ion Battery Expansion / Fire Risk from Quick Charging). The recall, announced September 30, 2025, requires a software update to the battery management system. Nissan has advised not to use the CHAdeMO DC fast charging port until remedied. No remedy is currently available, and the software update has not been deployed. This defect substantially impairs the vehicle's use, value, and safety for its intended purpose (long-distance travel), restricting it to local driving only. The delay has caused significant loss of use. We previously contacted Nissan on October 7, 2025 (Case #55896895) with no resolution. Contacted them again February 18 2026 (Case #56332493), with no resolution. This is ongoing as of February 2026.
Read More...NHTSA ID Number: 11718873
Complaint Date: 2026-02-18
Fail Date: 2024-10-17
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: EV6
Model Year: 2022
Summary
Incident occured october 17, 2024. Was driving approximately 30mph on a local road when lights flashed to "check electric vehicle system". Was speed restricted to 25mph (on 45mph road) and was able to make it back home approximately 1 mile away. Car completely shut down in my street prior to making it to my driveway. It needed to be towed to the nearest dealership. No lights in dash working and flickering. Prior to this failure over the preceding several months there were errors where I would plug the car into Level 2 charging at home (9.6kWh) and the car would stop charging with a hot charging port approximately every 1 hour. I would unplug and replug in again. Charging would work. Level 3 was working just fine without problem. After going to the dealership it was deemed that the ICCU component needed to be replaced. After replacing car worked well and no charging issues occured.
Read More...NHTSA ID Number: 11718872
Complaint Date: 2026-02-18
Fail Date: 2026-02-06
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2024
Summary
1) In May of 2025 I attempted to have the dealership complete the recall which the GM app told me to schedule. Related to the L87 engine failure. According to their own document my engine manufacture date was to be replaced a defective. The dealer told me that there was "no resolution for the issue and turned me away. (see attachments) 2) In June GM changed the procedure adding the PICO test. (see attachment) 3) In October I received the official recall notice and scheduled the test. At the prior service visit I had the dealer give me back the old oil filter. I took it apart and found metal fillings in it. I reported this to the dealer. The truck had the PICO test and passed. They told me that "the filter did its job and the metal in it was normal wear and tear". They replaced the oil cap and filled it with thicker oil. I was sent on my way, told to call if I had any issues. 4) On 2-6-25 while driving 65 MPH on the highway, the engine just shut off without warning. The dash displayed "press start again" while I was traveling at 65MPH. I was able to pull to the side and restart the engine. Service was scheduled and performed on 2-10-26. They found no codes in the computer and could not find the issue. 5) On 2-13-26 while driving 75 on the interstate the engine stopped, the display read "press start again". I was able to coast through traffic and got to the shoulder. After some time and playing with the buttons I was able to get the truck into park. Then I started the engine. I made it off the freeway and onto a side road. I drove a few miles further and stopped for a stop sign. The truck was again dead, displaying "press start again". After several attempts and my vehicle in traffic, I got it to start. It drove for a mile more and the truck was dead. I had it towed to the dealership where they are working in it. It requires a new engine. 6) GM failed and endangered my family while traveling at freeway speeds. They should buy back their failure.
Read More...NHTSA ID Number: 11718871
Complaint Date: 2026-02-18
Fail Date: 2025-12-01
Manufacturer Name: Volkswagen Group of America, Inc.
Vehicle Make: VOLKSWAGEN
Vehicle Model: ATLAS CROSS SPORT
Model Year: 2024
Summary
am writing to formally report a serious safety issue with my Volkswagen Atlas. The SOS system is malfunctioning, and as a result, I am unable to use cruise control. The vehicle is displaying system errors, and I have been informed that this issue affects multiple driver-assistance features. This malfunction creates a dangerous driving condition. The SOS system is intended for emergency assistance, and its failure raises concerns about whether emergency services would be contacted in the event of an accident. Additionally, the loss of cruise control impacts safe operation, particularly during highway driving. Given that this is a safety-related system, I believe this issue requires immediate attention and resolution. Please advise: Whether this issue is covered under warranty If there are any known recalls or service bulletins related to this malfunction What steps will be taken to correct the problem promptly I request that this matter be treated as urgent due to the safety risks involved. I expect a timely response and a clear plan for repair.
Read More...NHTSA ID Number: 11718870
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: International Motors, LLC
Vehicle Make: INTERNATIONAL
Vehicle Model: MV
Model Year: 2023
Summary
The contact leased a 2023 International MV607 from Enterprise Rental Car. The contact stated that while driving approximately 60 MPH, the driveshaft unexpectedly detached from the vehicle. There was no warning light illuminated. The vehicle was towed to an independent mechanic, where it was diagnosed and determined that the driveshaft had failed and needed to be replaced. The vehicle was repaired by the independent mechanic. The dealer was not contacted. The vehicle was not diagnosed or repaired by the dealer. The manufacturer was not made aware of the failure. The approximate failure mileage was 105,631. The VIN was not available.
Read More...NHTSA ID Number: 11718869
Complaint Date: 2026-02-18
Fail Date: 2025-12-10
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: DAKOTA
Model Year: 2006
Summary
See attached document for complaint.
Read More...NHTSA ID Number: 11718868
Complaint Date: 2026-02-18
Fail Date: 2026-01-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: TAURUS
Model Year: 2010
Summary
UNKNOWN
Read More...NHTSA ID Number: 11718867
Complaint Date: 2026-02-18
Fail Date: 2026-02-10
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2024
Summary
The engine lost power on the Hwy. Resulted in having to tow the vehicle to the dealership for an engine replacement. The truck is a 2024 with only 20K miles. There were no alerts within the interior to make me aware there was a problem. The engineer starting make a knocking sound at the time of failure. I had just gotten off the interstate when it failed. I spoke to a representative at the dealership and they informed me that the same engine will be installed, with a new oil type. I'm writing this given this will diminish the value of the truck, and I have to be worried about the engine failure happening again. Next time it could happen on the interstate with loss of power. I can't trust that to happen.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.