NHTSA ID Number: 11720647
Complaint Date: 2026-02-26
Fail Date: 2026-02-23
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2021
Summary
On 2-23-2026, while traveling at highway speeds on the freeway, the front upper and lower A-arms (control arms) suffered a complete structural failure. This caused an immediate loss of steering control, forcing the vehicle off the road. By sheer luck and reactive maneuvering, I was able to avoid a multi-vehicle collision; however, the failure resulted in over $4,000 in mechanical and body damage.
Read More...NHTSA ID Number: 11720646
Complaint Date: 2026-02-26
Fail Date: 2026-01-05
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2022
Summary
Vehicle has a 10-speed electronic controlled transmission that has been identified having issues in other models. The vehicle is experiencing jerking, hard shifting, and shifting delays. I want my model of vehicle to be included in the recall. Recently had the engine replaced due to another recall.
Read More...NHTSA ID Number: 11720645
Complaint Date: 2026-02-26
Fail Date: 2026-02-25
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL Y
Model Year: 2026
Summary
The 2026 Tesla model Y was driving in FSD (Supervised) mode in the Home Depot Colma, California parking lot, located at [XXX] on [XXX] at [XXX]. It stopped to let a black pickup truck in front of it pull about 3/4 of the way into a parking place on the right side. After waiting several seconds, it turned the wheels slightly to the left and slowly crept around the pickup truck, when the truck reversed and hit the passenger side of the vehicle at low speed just ahead of the rear wheel well. I believe a human driver would have waited until the pickup truck was fully parked before proceeding, thus preventing this accident, thus highlighting a failure of the FSD (Supervised) system. There were no warning lamps, messages or other symptoms of the problem prior to the failure, The accident was reported to my insurance company and the vehicle was inspected by a collision repair shop. The manufacturer has not been informed. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720644
Complaint Date: 2026-02-26
Fail Date: 2025-01-16
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2019
Summary
The contact owns a 2019 Jeep Cherokee. The contact received notification of NHTSA Campaign Number: 25V011000 (Power Train); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was taken to the dealer, who declined to complete the recall repair, and stated that the tires installed on the vehicle were incorrect. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11720643
Complaint Date: 2026-02-26
Fail Date: 2026-02-25
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2015
Summary
The contact owns a 2015 Jeep Grand Cherokee. The contact stated that while driving approximately 3 MPH and entering the garage, the passenger’s side active headrest inadvertently deployed. The contact stated that there were no warning lights illuminated; just a loud bang washeard when the headrest deployed. The contact had not taken the vehicle to a local dealer or independent mechanic to be diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 110,000.
Read More...NHTSA ID Number: 11720642
Complaint Date: 2026-02-26
Fail Date: 2025-09-10
Manufacturer Name: Volkswagen Group of America, Inc.
Vehicle Make: VOLKSWAGEN
Vehicle Model: TAOS
Model Year: 2025
Summary
While driving with my ACC activated to 71MPH, I was pulled over by Mass state police and told that my speed was between 76-81MPH. I've since confirmed the statement of the officer to be accurate by comparing the displayed vehicle speed is lower than what's displayed on apps such as Waze and google maps. Citation [XXX] was issued by the officer INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720641
Complaint Date: 2026-02-26
Fail Date: 2026-02-23
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: HIGHLANDER HYBRID
Model Year: 2021
Summary
The contact owns a 2021 Toyota Highlander Hybrid. The contact stated that upon starting the vehicle, the instrument panel lights were flashing. The vehicle then independently turned off and restarted repeatedly. The vehicle was towed to the dealer, where it was determined that the battery level was low and needed to be replaced. The battery was replaced, and other unknown repairs for shifting failure were performed. The vehicle was driven back to the residence; however, the failure recurred upon starting the vehicle the following day. Additionally, the seat belt chime reminders engaged even though the seat belts were securely fastened, and the tailgate had failed to open. The dealer was notified of the failure and informed the contact that the VIN was not included in TSB Number: T-SB-0019-21. The vehicle was not repaired. The manufacturer was notified of the failure, and the contact requested a trade-in or buy-back assistance. The failure mileage was approximately 77,900.
Read More...NHTSA ID Number: 11720640
Complaint Date: 2026-02-26
Fail Date: 2026-02-22
Manufacturer Name: Porsche Cars North America, Inc.
Vehicle Make: PORSCHE
Vehicle Model: BOXSTER
Model Year: 2003
Summary
The contact owns a 2003 Porsche Boxster equipped with Landgolden Tires, Tire Line: L27, Tire Size: 265/35/ZR18, DOT Number: (N/A). While performing routine maintenance on the vehicle, the contact discovered that the rear passenger’s side tire had experienced extensive tread separation. The online dealer from whom the tires were purchased from was contacted, but no assistance was offered. The manufacturer was not yet contacted. The failure mileage was approximately 20,000. The VIN was not available.
Read More...NHTSA ID Number: 11720639
Complaint Date: 2026-02-26
Fail Date: 2026-01-21
Manufacturer Name: Porsche Cars North America, Inc.
Vehicle Make: PORSCHE
Vehicle Model: PANAMERA
Model Year: 2018
Summary
The ride height sensor on the right front suspension is mounted to the upper control arm via a plastic bolt and bracket. This plastic mounting component failed under normal driving conditions. The failure caused the ride height sensor to malfunction, which directly affects the vehicle's air suspension system and its ability to maintain proper ride height and handling characteristics. When driving, I received multiple chassis height warning messages stating that the chassis was too high or too low or malfunctioning. The ride height sensor is a critical component of the Porsche Active Suspension Management (PASM) system. Its failure can result in: - Incorrect suspension height, affecting vehicle stability and handling - Suspension system faults that may trigger unexpected warning conditions while driving - Potential loss of driver control in the event of sudden sensor failure at highway speeds This failure is not isolated to my vehicle. A review of Porsche owner forums including Rennlist and 6SpeedOnline reveals similar plastic mount failures on the ride height sensor across multiple Porsche platforms, including the Cayenne, Macan, and Panamera. The fact that Porsche has since revised the replacement hardware from plastic to metal strongly implies the manufacturer is aware the original design was inadequate. However, no recall or Technical Service Bulletin has been issued to proactively notify owners or provide a remedy at no cost. When the plastic bolt and bracket failed on my vehicle, my dealership replaced it with the current Porsche-supplied metal replacement hardware because the plastic parts have been discontinued. However, the updated metal bolt and bracket are physically incompatible with the existing control arm, requiring the control arm to also be replaced. Owners who are unaware of this incompatibility may drive vehicles with an improperly secured or non-functional ride height sensor, increasing safety risk.
Read More...NHTSA ID Number: 11720638
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: SENTRA
Model Year: 2021
Summary
The passenger front, and both back windows no longer function. This appears to be a common issue when searching the internet. There is also an issue with the keyless start, as it often does not recognize that the fob is in the vehicle, or gives a low batter warning (with a new battery). As there was already a recall on the sensor for the blind spot warnings and such, there appears to be wide spread electrical and sensor issues with this year/make/model. The windows pose a safety risk if someone is trapped in a vehicle that the doors won't open.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.