NHTSA ID Number: 11718836
Complaint Date: 2026-02-18
Fail Date: 2025-10-03
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: DART
Model Year: 2016
Summary
The transmission shift cable does not work on the vehicle and will not shift out of gear, Unable to use vehicle due to the break in the cable.
Read More...NHTSA ID Number: 11718835
Complaint Date: 2026-02-18
Fail Date: 2026-02-16
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-550 SD
Model Year: 2021
Summary
I stopped at a campground after leaving SC. Discovered a Thor factory solar panel had detached somewhere between SC and Arkansas. The mounting bracket was still attached to the roof but the bolts, washers and nuts were missing on 2 of the 4 mounts and the other mounts had loose components. It would have been a possible catastrophic event if it would have detached at highway speeds.
Read More...NHTSA ID Number: 11718834
Complaint Date: 2026-02-18
Fail Date: 2025-03-07
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: WRANGLER
Model Year: 2014
Summary
ABS module failure. Can’t even buy parts as they are unavailable. Jeep should be liable for this. If ABS prevents dangerous situations and the module is failed, they should be liable.
Read More...NHTSA ID Number: 11718833
Complaint Date: 2026-02-18
Fail Date: 2022-04-01
Manufacturer Name: General Motors, LLC
Vehicle Make: BUICK
Vehicle Model: CASCADA
Model Year: 2016
Summary
The back window on the convertible top has separated from the fabric. Buick dealership said it was not a covered item under the extended warranty. We tried to glue it back down but it keeps separating all around. Dangerous situation because it could separate completely during travel and cause an accident/injury to others. Should be a recall item since it is being reported by several other Cascada owners.
Read More...NHTSA ID Number: 11718832
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: ACADIA
Model Year: 2021
Summary
Car was taken in for an oil change at 62k Miles. Dealer advised that it needed a radiator replaced. At 64k miles it was brought into the dealer for warranty work due to a failing thermostat. While being diagnosed, we were told not only the radiator needed to be replaced, but the oil cooler also needed to be replaced. So a 5 year old car with just over 60k Miles had the thermostat/sensor fail and need to be replaced. A radiator fail and need to be replaced and and an oil cooler fail and need to be replaced. Vehicle has been at a GM dealer for all maintenance. No crashes or reasons these parts should fail. Vehicle has never towed anything to but any sort of strain on the cooling system.
Read More...NHTSA ID Number: 11718831
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: RAV4
Model Year: 2011
Summary
Odometer Fraud. The contact purchased a 2011 Toyota Rav4. The contact discovered that there was a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 146,000. It was later discovered, upon checking with the local State Secretary, that the mileage was 190,000.
Read More...NHTSA ID Number: 11718830
Complaint Date: 2026-02-18
Fail Date: 2025-09-18
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EXPLORER
Model Year: 2014
Summary
The contact owns a 2014 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that while driving 60 MPH, the passenger's side windshield exterior A-Pillar trim separated from the vehicle. The vehicle was taken to the dealer, where it was inspected, and the dealer confirmed that the part needed to be replaced. The vehicle was not repaired because parts for the recall repair were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 245,000.
Read More...NHTSA ID Number: 11718829
Complaint Date: 2026-02-18
Fail Date: 2024-12-18
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SUBURBAN
Model Year: 2021
Summary
The contact owns a 2021 Chevrolet Suburban. The contact stated that while driving 45 MPH, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended, and the vehicle decelerated unintendedly. Additionally, the vehicle failed to exceed 42 MPH. Later in the day, the gear shifter was shifted to reverse; however, the vehicle failed to reverse as intended. The vehicle was taken to the dealer, where it was diagnosed with transmission valve body failure. The contact was informed that the transmission valve body needed to be replaced. The vehicle was repaired. The contact stated that the vehicle was at the dealer from December 2024 until June 2025. The vehicle was picked up from the dealer. The contact stated that while driving at an undisclosed speed, the engine seized and failed to restart. The vehicle was towed back to the dealer, where the contact was informed that the fuel pump had failed, and the battery was drained. The contact was informed that the battery and the fuel pump needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 35,000.
Read More...NHTSA ID Number: 11718828
Complaint Date: 2026-02-18
Fail Date: 2025-09-11
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: RAV4 PRIME
Model Year: 2023
Summary
The contact owns a 2023 Toyota Rav4 Prime. The contact stated that while operating the vehicle, the instrument panel was inoperable. The contact received notification of NHTSA Campaign Number: 25V595000 (ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 21,000.
Read More...NHTSA ID Number: 11718827
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: JOURNEY
Model Year: 2018
Summary
The contact owns a 2018 Dodge Journey. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that occasionally the rearview camera image appeared upside down or distorted. The contact received notification of NHTSA Campaign Number: 25E052 (Back Over Prevention). The vehicle was taken to the dealer, where it was determined that the rearview camera needed to be replaced. The vehicle was not repaired. The dealer informed that the contact that the parts were not available. The manufacturer was not made aware of the failure. The approximate failure mileage was 132,000.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.