NHTSA ID Number: 11718806
Complaint Date: 2026-02-18
Fail Date: 2025-10-06
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2022
Summary
The contact owns a 2022 Ford F-150. The contact stated that while driving at an undisclosed speed, there was an abnormal rattling sound coming from the rear of the vehicle. The vehicle was taken to the dealer, where it was diagnosed with a detached rear axle bolt. The contact was informed that the repair was covered under recall and that the parts needed to be ordered. The vehicle was not repaired. The contact was informed that the vehicle could still be driven. The contact received a text alert from an alternate dealer that the parts were available for the recall repair. The vehicle was taken to the alternate dealer, and the vehicle remained with the dealer unrepaired since December 2025. The vehicle was not repaired. The contact was advised by an associate to contact the NHTSA Hotline to report the failure. The contact received notification of NHTSA Campaign Number: 23V896000 (Power Train); however, parts were not yet available. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 35,000.
Read More...NHTSA ID Number: 11718805
Complaint Date: 2026-02-18
Fail Date: 2026-02-17
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: BLAZER
Model Year: 2019
Summary
P0128 code. Coolant temperature sensor and thermostat failure.
Read More...NHTSA ID Number: 11718804
Complaint Date: 2026-02-18
Fail Date: 2024-09-01
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2020
Summary
I have had 22 recalls to date on this vehicle and received 1 recall notice. Engine light comes on alot, makes noises and then goes away after a couple days. Windshield washer stopped working on front windshield, now back stopped working. Tire pressure monitor & sensor default stays on (previous recall) Window on driver side stopped working, back passenger door on drivers side don't shut correctly like the weld come loose. Back brakes make a crazy noise when backing up. Back up camera warning comes up. I've only had this vehicle since 09-2023 and purchased from Ford as a Ford Blue Certified and have nothing but issues. Most of these recalls risk is a fire. If I'm involved and live through a fire I will make sure FORD is held accountable. The open recall with risk of fire currently has been open since July 2025 and no repair yet. This is totally unacceptable if they want me to keep paying for it. Thank you
Read More...NHTSA ID Number: 11718803
Complaint Date: 2026-02-18
Fail Date: 2026-02-05
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CR-V
Model Year: 2024
Summary
Auto braking system randomly goes off. When it does go off there is nothing the driver can do causing danger to driver and others on the road
Read More...NHTSA ID Number: 11718802
Complaint Date: 2026-02-18
Fail Date: 2026-02-14
Manufacturer Name: Ford Motor Company
Vehicle Make: LINCOLN
Vehicle Model: MKX
Model Year: 2016
Summary
The contact owns a 2016 Lincoln MKX. The contact received notification of NHTSA Campaign Number: 25V544000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed but traveled down to the floorboard, and the vehicle failed to respond as needed. Additionally, there was an abnormal grinding sound coming from the brakes. The brake fluid warning light was illuminated. The contact stated that on a separate occasion, the brake fluid reservoir was refilled, and days later, the low brake fluid warning light was illuminated. Most recently, the contact stated that when the vehicle was started, it rolled away. The vehicle was parked and was no longer driven due to safety concerns. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. However, no assistance was provided. The failure mileage was 122,934.
Read More...NHTSA ID Number: 11718801
Complaint Date: 2026-02-18
Fail Date: 2026-01-01
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2015
Summary
The contact owns a 2015 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the brake pedal was firm and unresponsive, and the vehicle was difficult to stop. The vehicle eventually came to a stop with the ABS warning light illuminated. The vehicle was driven back to the residence. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 132,235.
Read More...NHTSA ID Number: 11718800
Complaint Date: 2026-02-18
Fail Date: 2026-02-02
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SANTA FE SPORT
Model Year: 2018
Summary
The contact owns a 2018 Hyundai Santa Fe Sport. The contact stated that while driving at 55 MPH, the engine made a knocking sound, and the vehicle started shaking before starting to smoke. There was no warning light illuminated. The vehicle was towed to the dealer, who determined that there was a hole in the engine block and that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and informed the contact that since Service Campaign: 953 (ECM & Cluster Update) was not completed in a timely manner, the engine replacement was not covered. The contact had not received the notification for Service Campaign: 953 (ECM & Cluster Update) or owned the vehicle when the Service Campaign had started. The failure mileage was approximately 122,000.
Read More...NHTSA ID Number: 11718799
Complaint Date: 2026-02-18
Fail Date: 2026-01-11
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2019
Summary
The contact owns a 2019 Jeep Grand Cherokee. The contact received notification of NHTSA Campaign Number: 24V838000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the ESC and ABS warning lights were illuminated. Additionally, the vehicle unexpectedly shifted out of gear. The dealer was contacted to confirm the recalls. However, due to past experiences, the contact decided not to have the recall repair completed at the dealer. Another dealer, Eastchester Chrysler Jeep Dodge Ram (4007 Boston Rd, Bronx, NY 10466), was contacted; however, the dealer was unable to perform the recall repair because parts were on backorder. The manufacturer was made aware of the issue and confirmed that the part was available for the recall repair; however, the manufacturer was unable to expedite parts to the dealer. The failure mileage was approximately 92,000.
Read More...NHTSA ID Number: 11718798
Complaint Date: 2026-02-18
Fail Date: 2026-02-16
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SOUL
Model Year: 2016
Summary
When car is turning a right, the car turns off. When car is parked & stearing isnt straight car wont turn on.
Read More...NHTSA ID Number: 11718797
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: General Motors, LLC
Vehicle Make: BUICK
Vehicle Model: CASCADA
Model Year: 2016
Summary
The rear window of the convertible top starts to pull away from the top itself. Could separate and displace entirely causing damage or injury behind.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.