NHTSA ID Number: 11720357
Complaint Date: 2026-02-25
Fail Date: 2026-02-15
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2025
Summary
Ram recall 03D, NHTSA-26V-059. The Ram dealer stated replacement "trailer control modules" will be installed in unsold units first, not existing owners of sold units. My vehicle has NOT been repaired. The Ram app states my recall issue is resolved- it is not. I cannot safely and legally tow my trailer because of this issue. Stellantis needs to be held accountable as the manufacturer WAS aware of this issue before I was allowed to purchase the truck.
Read More...NHTSA ID Number: 11720356
Complaint Date: 2026-02-25
Fail Date: 2026-02-11
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2018
Summary
The contact owns a 2018 Ford F-150. The contact stated that while driving approximately 18 MPH in a storm, the driver’s side windshield wiper blade arm disconnected from the vehicle, creating a visibility hazard for the driver. Upon inspection, the contact discovered that the round gear of the wiper arm had sheared off. The local dealer and manufacturer were notified of the failure, but no assistance was provided. The contact was informed that the same failure had been recalled for certain Canadian model vehicles but did not include the U.S. Market vehicles. The vehicle was not repaired. The failure mileage was 88,000.
Read More...NHTSA ID Number: 11720355
Complaint Date: 2026-02-25
Fail Date: 2026-01-09
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2019
Summary
The contact owns a 2019 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed, and the brakes seized. No warning lights were illuminated. The contact parked the vehicle. The contact inspected the vehicle; however, the failure reoccurred. The contact attempted to drive the vehicle several times, but the failure reoccurred. The contact stated that the failure was persistent. Due to the failures, the contact was almost in two crashes. The vehicle was towed to an independent mechanic, where it was diagnosed with a brake module reset. The independent mechanic contacted the dealer and was informed that the brake module needed to be reset. The technician from the dealer installed the software for the brake module reset, and the vehicle was repaired. The vehicle was retrieved, but the failure reoccurred a month later. The vehicle was towed to the dealer, and the contact was informed that the vehicle needed to be inspected by the engineer. The vehicle was not diagnosed or repaired. The contact was advised to continue driving the vehicle. The contact was advised to disable all the safety features. The contact stated that two major crashes were averted and refused to drive the vehicle until it was repaired. The contact stated that the failure was common with the vehicle. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 68,000.
Read More...NHTSA ID Number: 11720354
Complaint Date: 2026-02-25
Fail Date: 2026-02-24
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: KICKS
Model Year: 2020
Summary
Vehicle was just purchased from a Nissan Dealership (2020 Kicks) and less than 1,300 miles of driving throwing a code stating there is a problem with CVT transmission. Will not produce enough power when going uphill. RPMs will suddenly not go over 1 when given gas uphill. There was a recall for this problem on other 2020 kicks but ours isn't covered and we just purchased this vehicle and drove it home less than 2 months ago.
Read More...NHTSA ID Number: 11720353
Complaint Date: 2026-02-25
Fail Date: 2026-02-21
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2020
Summary
My entire engine and the right bank lifters failed. Thankfully, these issues didn't fail until my truck was parked in my garage. No warning lamps did not trigger until these issues started. There was no warning. I have been having engine issues with this truck dating back to 2022. I will include all documents showing the issues I've had in the past 3 years. I was informed by the dealer that this is a known issue with this year and model of truck and even they were surprised that GM hasn't issued a recall. The vehicle has been inspected by the dealership only.
Read More...NHTSA ID Number: 11720352
Complaint Date: 2026-02-25
Fail Date: 2026-02-25
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: COLORADO
Model Year: 2023
Summary
Radiator hose near failure, lose of coolant could be catastrophic. Upper Radiator hose quick disconnect O-ring inside failed.
Read More...NHTSA ID Number: 11720351
Complaint Date: 2026-02-25
Fail Date: 2026-02-25
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: MUSTANG
Model Year: 2019
Summary
Refused to fix the issue because the OBD reader did not provide any codes OBD reader is not sending any signals, but there is power I called Sam’s Ford to send a service to fix the recall but told me they will not fix the issues because no codes were being provided And the check engine light is active
Read More...NHTSA ID Number: 11720350
Complaint Date: 2026-02-25
Fail Date: 2026-02-15
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2024
Summary
I have a 2024 Jeep Grand Cherokee that I purchased July 19, 2024.I started having operational problems with the vehicle within two months. The car was in and out of the dealership five times through Nov. 2025. Each time the problem was verified by the service department and documented as such, including an incident of the engine shutting down when entering the expressway. I filed a lemon law claim September 2025, and settled December 2025. However, no reimbursement has been received. On Feb. 15, 2026, my car shut down completely as I was exiting a belt driven car wash, resulting in crashes of two vehicles in back of me. I had no control of shifting gears to move forward.
Read More...NHTSA ID Number: 11720349
Complaint Date: 2026-02-25
Fail Date: 2024-09-19
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: LEAF
Model Year: 2019
Summary
The contact owns a 2019 Nissan Leaf. The contact received notification of NHTSA Campaign Number: 24V700000 (Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that due to the recall information, the vehicle should not be charged at high-speed charging levels, and the vehicle could not be properly charged for a long trip. The dealer was contacted and confirmed that the part was not yet available for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 25,000.
Read More...NHTSA ID Number: 11720348
Complaint Date: 2026-02-25
Fail Date: 2026-02-19
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: TRAVERSE
Model Year: 2018
Summary
The vacuum pump had a catastrophic failure. This led to failure of assisted breaking, and caused brake pedal to go rock hard while driving on the roadway. Metal shards from the vacuum pump broke off, and has now entered the engine. Chevy knows this vacuum pump is flawed, but did not include my model of vehicle in the recall. Even though it uses the same part. I received a “brake assist” message on the dash about 15 seconds prior to the loss of brakes. I had my wife and two kids with me, and this jeopardized their safety. Further research on the matter states this is a known issue at GM, but for some reason my year and model were not included.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.