NHTSA ID Number: 11720207
Complaint Date: 2026-02-24
Fail Date: 2025-10-20
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 3500
Model Year: 2023
Summary
August of 2025 [XXX] purchased a certified GMC Sierra 3500. The truck had been traded in May and sat in their service department waiting on a valve body. At this point, we knew this. [XXX] had done research on it, and felt confident in being told the valve body was completely replaced and now working…. Worst mistake we’ve made in a long time. It was not replaced, that was only the beginning of the lies. [XXX] then drove the truck across the country for work, not knowing how much of a hazzard it was. Shortly after arriving there he quickly realized the truck was still having transmission problems. We brushed it off, these things happen. Fast forward when he came home in September/October he took the truck to the Rice Buick GMC service department. Where he was supposed to “wait” on his appointment. Only to call me hours later, they clearly weren’t going to be done that day. We left not knowing that it would be nearly a month until we could drive the truck again. In the midst of that they never offered any help, a rental or anything. When I asked, they offered a tiny small car next door at enterprise. I clearly did not agree, we just spent a lot of money on a heavy duty truck for a reason. It took multiple phone calls to multiple supervisors for them to agree to let him rent a truck. Because you know they might have to spend an extra penny or something (que the eye roll). In that month of having the truck the communication was little to non existent. They never answered the phone, called back, heck most of the time the text messages weren’t even replied to. It once again took me getting a little bit ridiculous for an answer - the truck was “fixed”. When I picked up the truck I spoke to the the service manager, and he of course tried to play me like I was some dumb women who had no idea what I was talking about. He dismissed all of my concerns, acted like having a truck for a month was normal. (More attached in photos) INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720206
Complaint Date: 2026-02-24
Fail Date: 2026-02-22
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: OPTIMA
Model Year: 2014
Summary
While driving down the highway, my engine completely turned off. I was able to get to a safe location. When I tried turning the car back on, it would not turn back on. I took it to Kia, and they said I was covered under warranty due to their settlement. However, due to the salvage title of the car, they will not replace the engine, even though that is what their recall settlement covers.
Read More...NHTSA ID Number: 11720205
Complaint Date: 2026-02-24
Fail Date: 2026-01-23
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2024
Summary
The vehicle has two open safety recalls. Recall 26V034000 – the vehicle does not meet Federal Motor Vehicle Safety Standard No. 226 for ejection mitigation. There is currently no remedy available. Recall 25V607000 – seat belt buckle may not latch properly, increasing the risk of injury in a crash. The vehicle also had a powertrain fault that triggered the check engine light and it has been at the dealership for more than 30 days for I am concerned about the safety of my famil
Read More...NHTSA ID Number: 11720204
Complaint Date: 2026-02-24
Fail Date: 2023-01-01
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EXPLORER
Model Year: 2013
Summary
The contact owns a 2013 Ford Explorer. The contact stated that the trim along the front windshield had become loose, and the lining was pushed outward and was partially missing and detached. The contact was concerned that the windshield could potentially loosen or fall out due to the failure. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure). The local dealer was contacted and confirmed that parts were on back order. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was unknown.
Read More...NHTSA ID Number: 11720203
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2015
Summary
2/24/26 around 10:45am CST the passenger seat headrest exploded/combusted with a very loud popping noise while driving the car 40 mph on a smooth surface road. Luckily nobody was sitting in the passenger seat. I don't want to drive my car as now I'm afraid this will happen to the driver's seat headrest.
Read More...NHTSA ID Number: 11720202
Complaint Date: 2026-02-24
Fail Date: 2026-02-13
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2014
Summary
car has 56K miles. went to dealer for the recall on the bushing and cap. left dealer and next couple days the car slid twice in my driveway a few feet even with parking brake on. went back to dealer and they said cant duplicate problem. Drove home and car continues to have shifting issues and going out of gear.. have to shift to park or neutral and then reengage and to try to get it to work. in the mornings after sitting its now having issues going in gear and then after awhile will work. called dealer and Ford corporate and they said there is nothing they can do or help with. the car is a safety hazard slipping out of gear while driving in traffic or on a hill and then you are stranded in fear of getting totaled out from behind until it decides to go into gear! this is terribly dangerous and it only has 56, 600 miles on it!! Also the engine is NOT throwing a code. so dealer and another repair shop has charged 1600 for service and its still doing it!!!! Me researching seems to prove ford had transmission issues with this year of escape titanium and the edge etc.... why is there not a full recall on the transmission that they have to fix with such little mileage!
Read More...NHTSA ID Number: 11720201
Complaint Date: 2026-02-24
Fail Date: 2026-02-18
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL 3
Model Year: 2022
Summary
While using Tesla's Full Self-Driving (Supervised) software on the Pacific Coast Highway (PCH) and other highways, the vehicle’s automated steering system repeatedly malfunctions by failing to maintain lane centering. Specifically, the car drifts or actively steers across double yellow lines into the lane of oncoming traffic. This issue is a persistent failure of the Advanced Driver Assistance System (ADAS) and Lane Keeping Assistance. The vehicle has attempted this maneuver multiple times at [Approximate Speed, e.g., 40-60 mph], requiring immediate and forceful manual steering intervention to avoid head-on collisions with oncoming vehicles. The system provides no warning chimes, error messages, or "Take Over Immediately" alerts prior to crossing the lines; it appears to perceive the oncoming lane as a valid path or fails to recognize the double yellow boundary entirely. This has occurred during [mention conditions: e.g., bright daylight with high glare / night time]. The vehicle is equipped with Hardware 3.0 (HW3). I believe the 1.2-megapixel camera suite or the processing power of the HW3 computer is insufficient to safely navigate the geometry of the PCH or any roads within mountains/hills. I have attempted to "Clear Calibration" and performed system resets, but the life-threatening behavior persists. The vehicle and its internal data logs are available for inspection. I have also sent "Bug Reports" via voice command to the manufacturer immediately following these near-miss events.
Read More...NHTSA ID Number: 11720200
Complaint Date: 2026-02-24
Fail Date: 2025-08-04
Manufacturer Name: Volkswagen Group of America, Inc.
Vehicle Make: AUDI
Vehicle Model: Q7
Model Year: 2020
Summary
I discovered this item while researching another issue. There was a class action law suit against VW/Audi for the Water Pump and coolant leaking into the system. The class action covered the year and model for my Audi (2020 Q7) but my VIN was not included. The class action ended in 2024. On 8/4/25, My water pump went out because of coolant going into system. A $6,000 repair. I brought the issue up with Audi. No response.
Read More...NHTSA ID Number: 11720199
Complaint Date: 2026-02-24
Fail Date: 2026-02-23
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PILOT
Model Year: 2019
Summary
Last year fuel pump in gas tank was fixed/recalled, fixed 2/2025, now 2/2026 the high efficiecy fuel pump in engine bay started making loud noises--no warning/codes--just loud banging noise, mechanic confirmed high efficiency fuel pump failing. search on youtube also confirms many year/models as mine having same issue
Read More...NHTSA ID Number: 11720198
Complaint Date: 2026-02-24
Fail Date: 2026-02-23
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: FUSION
Model Year: 2010
Summary
The vehicle turns on the traction control and ABS lights, automatically makes a bell sound as a warning, and stops braking, regardless of your speed at that moment.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.