NHTSA ID Number: 11720227
Complaint Date: 2026-02-24
Fail Date: 2026-02-23
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PILOT
Model Year: 2019
Summary
Fuel gage read incorrectly staing we had gas and estimated fuel for 70 miles. We stalled while driving. Several error lights came on, car would not start. After researching we saw alot of complaints about fuel Guage issues so we were able to get 2 gal of gas and then make it to a gas station. Took car in for diagnostic, no known problem. ????
Read More...NHTSA ID Number: 11720226
Complaint Date: 2026-02-24
Fail Date: 2026-02-23
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SONATA
Model Year: 2015
Summary
I JUST GOT THIS CAR ABOUT 2 MONTHS AGO AND NOW I AM BEING TOLD I NEED A NEW ENGINE. I JUST LOOKED UP 2015 HYUNDAI SONATAS AND SEE THAT THIS MODEL DOES HAVE REPEAT ISSUES OF ENGINE FAILURE SO I DO NOT UNDERSTAND WHY THIS VIN NUMBER IS NOT UNDER THE RECALL LIST SINCE I AM HAVING THE SAME ISSUE
Read More...NHTSA ID Number: 11720225
Complaint Date: 2026-02-24
Fail Date: 2026-02-21
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SUBURBAN
Model Year: 2015
Summary
Pulling off from a stop sign on a hill, the car wouldn't accelerate and rolled back hitting a pedestrian and then jerked forward aggressively burning rubber on the tires. I smell the transmission burning. Luckily the lady didn't want to press charges.
Read More...NHTSA ID Number: 11720224
Complaint Date: 2026-02-24
Fail Date: 2025-11-17
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SONATA
Model Year: 2021
Summary
The contact owns a 2021 Hyundai Sonata. The contact received notification of NHTSA Campaign Number: 25V796000 (FUEL SYSTEM, GASOLINE); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11720223
Complaint Date: 2026-02-24
Fail Date: 2026-01-15
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2022
Summary
Multiple 12v batteries died within one year of installation; ICCU finally failed at about 3.5 years of ownership. Towed to dealer on January 16, 2026, still no repair as of February 24, 2026.
Read More...NHTSA ID Number: 11720222
Complaint Date: 2026-02-24
Fail Date: 2025-06-15
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2019
Summary
The contact owns a 2019 Ford Escape. The contact stated that while driving at 55 MPH, the check engine warning light illuminated. A dealer was contacted. The vehicle was taken to the dealer, where it was diagnosed, and it was determined that the engine needed to be replaced due to coolant intrusion into cylinder #2. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 74,500.
Read More...NHTSA ID Number: 11720221
Complaint Date: 2026-02-24
Fail Date: 2024-11-20
Manufacturer Name: Ford Motor Company
Vehicle Make: LINCOLN
Vehicle Model: NAVIGATOR
Model Year: 2024
Summary
On May 26, 2024, I entered into a lease agreement for a Lincoln Navigator vehicle manufactured and warranted by Lincoln Motor Company. This vehicle subsequently developed multiple serious and dangerous safety defects, including uncontrolled and spontaneous seat inflation, failure of seat pump systems, infotainment system failure including loss of backup camera and safety display systems, unexpected closure of side mirrors while driving, and continued seat movement and mechanical activation after the vehicle was powered off. These defects presented a direct and substantial risk to occupant safety. On multiple occasions, uncontrolled seat inflation physically restrained and trapped an occupant, including a minor child, by causing the seat structure to expand while the seatbelt locking mechanism engaged, restricting the occupant’s ability to exit the seat. These events occurred while the vehicle was in operation, including while traveling on a public freeway, creating an immediate and dangerous safety hazard. Lincoln Motor Company and Galpin Ford were repeatedly notified of these safety defects. On January 6, 2025, the vehicle was delivered to Galpin Lincoln, an authorized Lincoln Motor Company repair facility, for emergency repair due to these ongoing and escalating safety failures. Lincoln Motor Company retained possession of the vehicle for approximately eighty-three (83) days. During this time, Lincoln Motor Company admitted in writing that critical seat systems and associated pump mechanisms were not functioning as designed. Lincoln Motor Company further admitted that no repair remedy existed for certain infotainment and software-related system failures due to lack of available corrective software or engineering solution. Despite these admissions & despite exceeding statutory repair period thresholds, Lincoln Motor Company failed to repair myriad safety hazards on our Navigator leaving us with an inoperable vehicle.
Read More...NHTSA ID Number: 11720220
Complaint Date: 2026-02-24
Fail Date: 2025-11-24
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2022
Summary
The contact owns a 2022 Ford F-150. The contact stated that while driving approximately 10 MPH with the accelerator pedal depressed, the vehicle was hesitating before shifting from 1st to 2nd gear. There were no warning lights illuminated. The failure was intermittent at first but had become a recurring failure. The vehicle was taken to a local dealer, where it was diagnosed and determined that the transmission needed to be reprogrammed. The vehicle was repaired; however, the failure reoccurred. The manufacturer was informed of the failure. The failure mileage was approximately 66,000.
Read More...NHTSA ID Number: 11720219
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: YUKON
Model Year: 2025
Summary
The contact owns a 2025 GMC Yukon. The contact stated that while driving at an undisclosed speed, the vehicle unexpectedly went into LIMP Mode with a limited speed availability message displayed. The vehicle was restarted; however, the failure recurred. The vehicle was taken to the dealer, where it was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 8,837
Read More...NHTSA ID Number: 11720218
Complaint Date: 2026-02-24
Fail Date: 2026-02-06
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: CHRYSLER
Vehicle Model: PACIFICA
Model Year: 2018
Summary
Vehicle went into limp mode Twice. 1st time on 10/28/24, Technician found fault for Hybrid Battery pack, Chrysler technical service bulletin said to clear fault then drive, if fault did not come back release the vehicle Work order stated, Bring vehicle back if it happens again and replace hybrid battery. 2nd time, 2/06/2026 vehicle went into limp mode again while driving. My safety and the safety of others was put at risk as I was driving on a highway at 65 MPH and suddenly without warning and no braking involved went down to 20 MPH. A very unsafe maneuver as the following vehicles had no indication I was braking or Slowing down. The dealer has confirmed the limp mode incident but so far has been unable reproduce it. The vehicle and components have only been inspected by the dealer. The warning lamps and messages only came on as the event unfolded. A sudden and uncontrollable loss of power. The dealer states that they believe the hybrid battery pack is failing, but Chrysler, Stellantis will not replace the hybrid battery pack unless the dealer can reproduce the incident. Extremely dangerous thing to try and recreate.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.