NHTSA ID Number: 11720247
Complaint Date: 2026-02-24
Fail Date: 2026-02-18
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2008
Summary
My son was sitting in our Silverado waiting for the truck to warm up before he left for work. As he was sitting there both driver and passenger side air bags deployed. It hit my son in the head. The truck has never been in an accident. It doesn't have a branded title. There doesn't seem to be a logical explanation for why this happened.
Read More...NHTSA ID Number: 11720246
Complaint Date: 2026-02-24
Fail Date: 2025-02-24
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: MALIBU
Model Year: 2013
Summary
The contact owns a 2013 Chevrolet Malibu. The contact stated that while idling at a stoplight, the vehicle suddenly stalled. The failure occurred on several occasions. The contact stated that after restarting the vehicle, the vehicle operated normally, but failed to immediately restart on several occasions. The vehicle was taken back to the dealer, who replaced the engine oil pump, but the failure persisted. The manufacturer and local dealer were not notified of the failures. The failure mileage was 125,000.
Read More...NHTSA ID Number: 11720245
Complaint Date: 2026-02-24
Fail Date: 2026-02-08
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2023
Summary
My 2023 Nissan Rogue SV engine failed on February 8, 2026. It is currently not on the recall list, but has the same engine as on the recall list. I have contacted Nissan multiple times with no help. My Nissan has 108000 miles and I should have a documented case open with Nissan now. Nissan should repair my engine. I spent $24000 on this vehicle one year ago. This is unacceptable. The vehicle is sitting at the shop with cylinder three filling up with fluid. The Rogue never showed any check engine lights or anything. It just failed. It has the 1.5 liter 3 cylinder turbo engine. The vehicle started shaking. I parked the vehicle then it would not start back. Had it towed to shop to diagnose issue. They confirmed castastropic engine failure.
Read More...NHTSA ID Number: 11720244
Complaint Date: 2026-02-24
Fail Date: 2026-02-23
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: ACURA
Vehicle Model: ZDX
Model Year: 2024
Summary
My husband was driving on a small road and we were going about 25mph when he tapped the brakes the car jumped forward and the brakes did not catch. We lunged forward almost crashing into another car. No warning lights appeared. Driving conditions were normal, dry roads. Brought it into the dealership again for the same issue that we brought it in for less than 30 days ago.
Read More...NHTSA ID Number: 11720243
Complaint Date: 2026-02-24
Fail Date: 2026-02-11
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2019
Summary
2019 jeep grand Cherokee 3.6L. Severe misfiring on expressway causing vehicle to shake uncontrollably and stall. “Pentastar tick” Ticking sound coming from engine. Took to local repair shop and right cam shaft is worn down causing misfiring and engine damage. Cost is $4,000 for the camshaft replacement and will likely need a new engine. Vehicle has less than 109,000 miles on it. Known issue on this vehicle, I called multiple shops and they all said that the can shaft is probably bad because they see the issue all the time.
Read More...NHTSA ID Number: 11720242
Complaint Date: 2026-02-24
Fail Date: 2025-09-01
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: LEAF
Model Year: 2022
Summary
My 2022 Nissan LEAF (VIN: [XXX] , approximately 24,000 miles) is subject to an active safety recall involving the high‑voltage battery and risk of fire during DC fast charging. This includes NHTSA Recall Campaign No. 25V‑655 (Nissan Recall No. R25C8), which relates to battery overheating during Level 3 (DC fast) charging. Related prior campaigns include 24V‑700 affecting similar Nissan LEAF battery systems. Nissan has instructed owners not to use Level 3 fast charging but has failed to provide a timely repair or firm remedy date. I have been waiting [X months] with no confirmed resolution. The restriction significantly limits vehicle range and usability, increases charging time, and creates ongoing inconvenience and safety concerns. Despite the seriousness of the defect, Nissan has not offered a loaner vehicle, compensation, or alternative remedy. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720241
Complaint Date: 2026-02-24
Fail Date: 2025-12-24
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2020
Summary
During an extreme cold event in Interior Alaska (–44°F), the vehicle experienced a sudden emissions‑system failure that triggered an EPA‑mandated Limp Mode, limiting the vehicle to 5 MPH on high‑speed highways. This created an immediate life‑safety hazard because it was impossible to maintain a safe speed or exit the roadway due to snow berms. Prior to the failure, the vehicle displayed “Service Emission System” warnings and multiple DTCs related to the reductant heaters and sensors. A dealership technician later confirmed a “burnt pin” at the reductant pump connector, consistent with thermal‑electrical overload. This failure mode matches GM’s TSB 21‑NA‑006, describing connector overheating in cold climates. After the repair, the vehicle continued to exhibit safety‑critical symptoms, including harsh downshifts, delayed engagement, and jerking during deceleration, consistent with Recall 26V083000 (rear‑wheel lock‑up risk). The vehicle also continues to emit an electrical burning odor in cold temperatures, consistent with Recall N192206310 (block‑heater fire risk). The only GM dealership in the region issued a “Termination of Business Relationship,” preventing access to all recall and warranty repairs. This has created a 321‑mile “Service Desert,” making it impossible to obtain federally mandated recall remedies. The vehicle remains unsafe to operate due to unresolved transmission, electrical, and propulsion issues.
Read More...NHTSA ID Number: 11720240
Complaint Date: 2026-02-24
Fail Date: 2025-11-24
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: RAV4
Model Year: 2011
Summary
The contact owns a 2011 Toyota Rav4. The contact stated that while driving and depressing the brake pedal to come to a complete stop, the vehicle continued to accelerate unintendedly. The contact continuously depressed the brake pedal and shifted to neutral(N), and the vehicle responded as intended. The contact stated that the failure recurred while at a complete stop and while reversing from the driveway onto the roadway. The failure only occurred while the cruise control was activated but not set. The contact previously owned another 2011 Toyota Rav4 vehicle, which also experienced the failure. An independent mechanic informed the contact that the manufacturer had previously provided a remedy for the failure. The dealer and the manufacturer were not contacted. The vehicle was not diagnosed or repaired. The failure mileage was approximately 135,000.
Read More...NHTSA ID Number: 11720239
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: TUNDRA
Model Year: 2025
Summary
Bad factory alignment caused OEM tires (Falken Wildpeak A/T, 265/60 R20) to wear prematurely. Tread depth reduced to 3/32 on all 4 tires at 10,500 miles. Clearly a safety risk as no reasonable person would expect new tires to last only 10,000 miles and; therefore, likely not check tread depth presenting significant safety risk in any inclement weather.
Read More...NHTSA ID Number: 11720238
Complaint Date: 2026-02-24
Fail Date: 2026-01-17
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: HORNET
Model Year: 2024
Summary
I am a disabled veteran reporting a failed recall remedy and a dangerous safety defect in a 2024 Dodge Hornet GT. This vehicle was previously serviced under NHTSA Recall 25V246000 (Rear Visibility System), where the display module was reportedly replaced/updated. On January 17, 2026, while driving at slow speeds, the center infotainment screen suffered a total failure and went blank. This failure resulted in the immediate loss of the rearview camera and all primary safety/vehicle interfaces, which is a direct violation of FMVSS No. 111. I provided video evidence of the total screen failure to the service department at Southern Dodge Jeep Ram Alfa Romeo in Norfolk Virginia. While they confirmed the failure occurred based on my footage, they stated they could not replicate the issue during their inspection and informed me there was "nothing they could do." They refused to keep me in a safe loaner vehicle, forcing me to choose between driving a fundamentally unsafe vehicle with my young child or incurring massive personal expense for a rental. Due to the manufacturer’s inability to provide a permanent remedy for a federally recalled safety defect, I was forced to sell the vehicle at a significant loss. I am filing this to urge an investigation into the effectiveness of the current remedy for Recall 25V246000.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.