NHTSA ID Number: 11720097
Complaint Date: 2026-02-24
Fail Date: 2026-01-13
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EXPLORER
Model Year: 2017
Summary
When driving my car, you can hear wind noise like the windows are down and it's loud enough to where I can't hear my kids most of the time when they need something from the backseats. These two recalls have been in place since May 2025 and there is still no remedy to fix this almost a year later. I have not taken it to a dealership but plan to this Friday 02/27/26.
Read More...NHTSA ID Number: 11720096
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2025
Summary
The contact owns a 2025 Ram 1500. The contact received notification of NHTSA Campaign Number: 26V059000 (Exterior Lighting, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11720095
Complaint Date: 2026-02-24
Fail Date: 2026-02-17
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CR-V
Model Year: 2017
Summary
I was pumping gas and DURING gas started pouring out by the rear tire flap. It was not a whole tank but a large amount. And the next day also noticed a puddle where gas tank lies. This has happened in the past but sporadically and not all of the gas comes out. Also, there is a safety recall on rear fuel feed pipe leaks AND fuel pump motor but supposedly not on this particular vehicle year/VIN.
Read More...NHTSA ID Number: 11720094
Complaint Date: 2026-02-24
Fail Date: 2026-02-01
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: WRANGLER
Model Year: 2018
Summary
The contact owns a 2018 Jeep Wrangler. The contact stated that while her son was driving approximately 70-75 MPH, the vehicle stalled. The check engine and traction control warning lights were illuminated. Upon research, the contact associated the failure with NHTSA Campaign Number: 18V524000 (Electrical System). The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 138,000.
Read More...NHTSA ID Number: 11720093
Complaint Date: 2026-02-24
Fail Date: 2026-02-04
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL S
Model Year: 2016
Summary
While driving in traffic, the vehicle displayed warnings stating “Unable to drive — Pull over safely.” The vehicle progressively lost power and became unable to propel itself, requiring me to stop in traffic. Additional warnings indicated reduced acceleration and performance. The vehicle remained powered (screens and electronics active) but could no longer drive. Tesla later diagnosed a high-voltage battery failure and provided an estimate for full battery replacement. The sudden loss of propulsion in traffic created a safety hazard because the vehicle could not accelerate or continue moving with traffic.
Read More...NHTSA ID Number: 11720092
Complaint Date: 2026-02-24
Fail Date: 2024-06-11
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SPORTAGE
Model Year: 2017
Summary
The vehicle has had recurring drivability problems since at least June 2024, including repeated check engine light illumination and severe loss of acceleration. On 06/19/2024, dealership service records document that the check engine light was on and the vehicle would not accelerate past 40 mph, and the check engine light was flashing. More recently, while driving on the interstate at highway speed, the vehicle suddenly lost power and dropped speed, forcing me to pull over on the side of the road for safety. This created a dangerous situation and risk of collision. The problem continues despite multiple service visits. A dealership service visit on 06/05/2025 documents stored diagnostic trouble code P0420 (Catalyst System Efficiency Below Threshold), but the dealership stated no further repairs were recommended and no repair was performed. This issue is recurring and creates a serious safety hazard due to sudden loss of power while driving. Vehicle: 2017 Kia Sportage VIN: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720091
Complaint Date: 2026-02-24
Fail Date: 2025-10-06
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: OPTIMA
Model Year: 2015
Summary
The vehicle started making a loud knocking/tapping noise while driving. The vehicle has randomly acted as if it was going to stall while driving prior to the knocking. Instantly the car was brought home and parked. A mechanic has assessed the vehicle and states the noise we are hearing is the rods. We also contacted another mechanic and they advised us to look up the VIN due to a recall for 2015 Kia optima’s and the failure of this exact issue but we learned it was only for hybrid models even though this model has had the same exact issues as that model. I then see there have already been complaints made for my same issue and model yet no recall campaign has been initiated. I am fearful to drive or try to sell this vehicle because what if someone else drives it and it does stall again during driving and injury or death occurs.
Read More...NHTSA ID Number: 11720090
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Hyundai Motor America
Vehicle Make: GENESIS
Vehicle Model: G70
Model Year: 2021
Summary
2021 Genesis G70 engine shutting off at stops, often linked to the Idle Stop and Go (ISG) system or, in some cases, unexpected stalls. Possibly the automatic transmission's calibration leading to rough stops, or needing to restart the car if the ISG fails to restart the engine upon releasing the brake. 2.24.26:The vehicle stopped running and would not restart a busy intersection which involves my safety and other drivers. This has happened a couple times and I have replaced the fob batteries several times just in case that was the problem. It has not been inspected because it was just involved in another incident yesterday and I have been only making it to work as I am afraid to drive it. The warning came up on the dash after the car shut off. The vehicle can be picked up and inspected at any time. I do not have another vehicle or rental option.
Read More...NHTSA ID Number: 11720089
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2025
Summary
The back windshield just shattered out of no where.
Read More...NHTSA ID Number: 11720088
Complaint Date: 2026-02-24
Fail Date: 2024-08-24
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: FLEX
Model Year: 2019
Summary
The contact owns a 2019 Ford Flex. The contact stated that the rearview camera was intermittently inoperable, and the image was distorted while reversing. The vehicle was taken to the dealer, where the rearview camera was replaced at the owner's expense. The vehicle was repaired. The contact later received notification of NHTSA Campaign Number: 24V951000 (Back Over Prevention). The dealer and the manufacturer were contacted for reimbursement; however, the contact was informed that reimbursement could not be provided because the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 34,226.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.