NHTSA ID Number: 11720117
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: SENTRA
Model Year: 2002
Summary
The contact called regarding the ownership of the 2002 Nissan Sentra. The contact received notification of NHTSA Campaign Number: 20V008000 (Air Bags); and would like the address to be removed from the vehicle recall distribution list because the vehicle owner does not live at the contact’s address. The manufacturer was contacted.
Read More...NHTSA ID Number: 11720116
Complaint Date: 2026-02-24
Fail Date: 2025-10-04
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SANTA FE
Model Year: 2025
Summary
I purchased this vehicle on September 8, 2025, from Antwerpen Hyundai of Clarksville. Since purchase, the vehicle has had persistent problems that substantially impair its use and market value. Issue 1: HVAC / Ventilation Defect: Outside air enters through the center dash vents even when the fan is turned off. The recirculation feature disengages automatically after a few minutes, allowing outside air into the cabin. This issue has been ongoing and unresolved despite service visits. Issue 2: Intermittent Screeching/Scratching Noise from Dash/Steering Column Area On October 4, 2025, we began hearing an intermittent screeching or scratching sound from the front dashboard/steering column area. The vehicle has been serviced 3 times at 2 dealerships: November 10–14, 2025 – Antwerpen Hyundai Clarksville: Technician documented that the sound was replicated on two separate occasions and attempted two repair solutions. We were told the issue was resolved. The sound returned the same day during the drive home. December 9-16, 2025 – Hyundai of Dundalk: Service record indicated “fittings greased.” No detailed explanation provided. Personnel who handled the vehicle were no longer employed at pickup. The noise continued. January 20 – February 5, 2026 –Antwerpen Hyundai Clarksville: Service manager drove vehicle approximately 55 miles each way (100+ miles total) attempting to replicate the sound but reported being unable to do so. When picking up the vehicle, the noise was present again. Audio recordings of the sound were provided to the dealership multiple times. The service manager later indicated he might use electronic diagnostic equipment but did not follow up further. Current Condition: The screeching/scratching noise continues intermittently. While not constant, it is recurring and has persisted since October 2025. The issue has been replicated and documented by dealership technicians previously but remains unresolved after three repair attempts. The HVAC issue contiues.
Read More...NHTSA ID Number: 11720115
Complaint Date: 2026-02-24
Fail Date: 2025-11-01
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2018
Summary
The contact owns a 2018 Ram 1500. The contact stated that while reversing, the back-over prevention camera malfunctioned and the screen was blank, creating a rear visibility hazard for the driver. Additionally, while driving at an undisclosed speed, the vehicle stalled and was towed to the local mechanic. The alternator and battery were replaced on several occasions; however, the failure persisted. The contact stated that on another occasion, while driving at an undisclosed speed, the tailgate erroneously opened. The cause of the failures was not yet determined. The manufacturer was notified of the failures and informed the contact that the VIN was not included in NHTSA Campaign Numbers: 18V398000 (BACK OVER PREVENTION) or 19V347000 (LATCHES/LOCKS/LINKAGES). The contact stated that the vehicle had experienced the failures listed in the recalls. The failure mileage was unknown.
Read More...NHTSA ID Number: 11720114
Complaint Date: 2026-02-24
Fail Date: 2026-02-16
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2017
Summary
When driving, the car has stopped 4 times in the last 3 years. Last week the car came to a red light and the inside lights started flashing. There was a warning that read "transmission not in park." The car's power steering and brakes went out and the car went through the red light. Three other times the car was on the expressway and it died with the same warning. Fortunately, the car was in the slow lane and was able to pull onto the shoulder. Once the car is put in Park and turned off, it is able to be restarted and everything is working.
Read More...NHTSA ID Number: 11720113
Complaint Date: 2026-02-24
Fail Date: 2026-02-02
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: C-HR
Model Year: 2018
Summary
TRANSMISSION FAILURE AT ONLY 74,000 MILES. VERY DISAPPOINTED TO FIND OUT THAT THEY ONLY HAVE A SPECIAL COVERAGE AVAILABLE IN CANADA FOR THIS ISSUE AND NOT THE UNITED STATES.
Read More...NHTSA ID Number: 11720112
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: EV6
Model Year: 2022
Summary
The contact owns a 2022 Kia EV6. While the contact’s daughter was driving approximately 40 MPH, the messages "Electric Failure: Stop Car Do Not Drive” and “12-Volt Battery Voltage Low" were displayed on the instrument panel. The vehicle then failed to exceed 20 MPH, causing the driver to activate the hazard lights while pulling over to a side street while driving approximately 5 MPH. On the side of the road, the vehicle lost power. The vehicle was left at the side of the road to be towed to the nearest dealer. The dealer was contacted and confirmed that it was a known failure with the Interior Command Centre Unit(ICCU), and that the ICCU might need to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 23,000.
Read More...NHTSA ID Number: 11720111
Complaint Date: 2026-02-24
Fail Date: 2025-11-08
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2025
Summary
The contact rented a 2025 Nissan Rogue from Hertz Car Rental - John Glenn Columbus International Airport. The contact stated that upon exiting the vehicle and closing the front passenger's side door, the rear window glass exploded. There was no injury sustained. The vehicle was driven back to Hertz Car Rental Company. The contact informed the rental company of the failure and was provided another vehicle; however, the rental company was attempting to charge the contact for the failure even though it was not due to operator error. The contact had not notified the dealer or manufacturer of the failure. No further information was available. The failure mileage was approximately 14,877. The VIN was not available.
Read More...NHTSA ID Number: 11720110
Complaint Date: 2026-02-24
Fail Date: 2026-02-09
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2022
Summary
I was on the freeway and went into limp mode and almost got into a traffic accident. My ICCU unit failed after two recalls on it.
Read More...NHTSA ID Number: 11720109
Complaint Date: 2026-02-24
Fail Date: 2022-01-01
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2016
Summary
The contact owns a 2016 Ford F-150. The contact stated that the door latch failed to lock securely. While driving at undisclosed speeds, the contact's son almost fell out of the vehicle, but the contact was able to grab him by the coat. The door ajar message was displayed. Additionally, the TPMS warning light was illuminated. The vehicle was taken to the local dealer, where it was repaired under NHTSA Campaign Number: 17V652000 (Latches/Locks/Linkages). However, the failure reoccurred. The manufacturer was contacted and referred the contact to another local dealer for assistance. The vehicle was taken to another dealer, Ourisman Ford of Alexandria Service (6129 Richmond Hwy, Alexandria, VA 22303); but was not diagnosed or repaired. The failure mileage was approximately 120,000.
Read More...NHTSA ID Number: 11720108
Complaint Date: 2026-02-24
Fail Date: 2025-07-01
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: BRONCO SPORT
Model Year: 2022
Summary
A manufacturer recall was issued for a defect involving the fuel system (fuel injectors), but no remedy or repair timeline has been provided. Due to the safety risk (potential fuel leakage and/or fire), I cannot reasonably use the vehicle without concern for liability if harm were to occur. Additionally, the recall must be marked as resolved in the NHTSA database before the vehicle can be returned to normal use, which is not possible without an available fix. The extended and indefinite repair timeline creates a significant burden, as the vehicle remains unusable with no clear resolution date. I have contacted both the dealer and the manufacturer, but no satisfactory resolution or timeline has been provided. No warning lights or prior symptoms were observed. The issue has not been independently reproduced, as it is a manufacturer-identified defect. The vehicle has not been repaired because no remedy is available. Overall, this represents a safety concern and loss of use, with no timeline provided for when the recall will be resolved.
Read More...- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.



