NHTSA ID Number: 11720137
Complaint Date: 2026-02-24
Fail Date: 2026-02-13
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 2500
Model Year: 2015
Summary
What component or system failed or malfunctioned, and is it available for inspection upon request? Truck caught fire in driveway about 5 minutes after parking truck and turning off engine. Truck is still in spot it burned and available for inspection. How was your safety or the safety of others put at risk? If I had been in truck when it caught fire, I could have burned. Has the problem been reproduced or confirmed by a dealer or independent service center? NA Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No
Read More...NHTSA ID Number: 11720136
Complaint Date: 2026-02-24
Fail Date: 2026-02-17
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2019
Summary
The contact owns a 2019 Chevrolet Silverado 1500. The contact stated that while driving 15 MPH and turning left, the low oil pressure and several unknown warning lights illuminated. The vehicle was pulled over into a parking lot. The contact stated that there was no oil in the engine. The vehicle was towed to an independent mechanic to be diagnosed. The mechanic associated the failure with NHTSA ID Number: 25V274000 (ENGINE AND ENGINE COOLING); however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 30,000.
Read More...NHTSA ID Number: 11720135
Complaint Date: 2026-02-24
Fail Date: 2026-02-20
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: RAM 1500
Model Year: 2008
Summary
I have been trying for over two years to have my local dodge dealership process the recall for my takata airbags (sandy sansing dodge in milton fl). Every attempt is either met with being disconnected from the call or being told I will be called back, and it never happens. I havr also attempted to call fcas takata recall department with similar results
Read More...NHTSA ID Number: 11720134
Complaint Date: 2026-02-24
Fail Date: 2025-11-12
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SANTA FE
Model Year: 2024
Summary
Both driver and front passenger seat belts are nearly impossible to snap it and it is just as hard to get them to release. Sometimes you think it is snapped together and it comes out going down the road. I have taken it to the dealer and they said the parts are on back order and have been for a long time. This is a serious safety issue. It looks to me like they would be on top of something like this. If there is an accident I don't trust the seat belts to protect me and my family. It has not been listed as a recall yet so I do not understand why they would be on back order for so long.
Read More...NHTSA ID Number: 11720133
Complaint Date: 2026-02-24
Fail Date: 2025-11-03
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: TRAVERSE
Model Year: 2021
Summary
The contact owns a 2021 Chevrolet Traverse. The contact stated that while driving at various speeds, the vehicle failed to respond intermittently upon depression of the accelerator pedal. Additionally, the contact stated that the gear shifter failed to respond or responded slowly when releasing the gear shifter button intermittently. The gear shifter was easily moved to a different gear from unintended contact. While accelerating from a complete stop, the vehicle hesitated to respond, jerked, and made an abnormal sound while the RPMs were significantly elevated. The vehicle failed to respond upon shifting to reverse(R), and the gear shifter was sticky. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, where the contact was informed that there were fault codes found that were related to the transmission. An appointment was scheduled with the dealer for a diagnostic test. The vehicle was not yet diagnosed or repaired. The contact related the failure to an unknown recall. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 137,000.
Read More...NHTSA ID Number: 11720132
Complaint Date: 2026-02-24
Fail Date: 2026-02-16
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: HIGHLANDER
Model Year: 2020
Summary
My 2020 Toyota Highlander, with 83k miles, started making a whining noise when accelerating. I took the vehicle to a local auto shop and they advised there was a transmission issue. There were never any warning signs of issue. I then took the vehicle to Antwerpen Toyota in Clarksville, MD (where the vehicle was purchased) and paid $185 for a diagnostic appointment. On February 20, 2026, The dealership provided a written estimate for “Replace automatic transmission assy” with a total cost of $9,403.77. I am very concerned for the safety of myself and others continuing to drive the vehicle without proper repair. The vehicle is otherwise in great condition and I keep up with all regular maintenance.
Read More...NHTSA ID Number: 11720131
Complaint Date: 2026-02-24
Fail Date: 2026-02-16
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: YUKON
Model Year: 2023
Summary
The engine failed and had to be replaced with less than 70,000 miles on it. There has already been a recall associated with these vehicles where a part is either replaced or special oil has to be used. It does not seem that the fix prevents the engine from failing.
Read More...NHTSA ID Number: 11720130
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Maserati North America, Inc.
Vehicle Make: MASERATI
Vehicle Model: GRANTURISMO
Model Year: 2024
Summary
The contact owns a 2024 Maserati GranTurismo. The contact stated that while driving at an undisclosed speed, the vehicle unexpectedly and aggressively pulled to the right while the contact was in the middle lane. There were no warning lights illuminated. While attempting to make a left turn, the contact had to abruptly depress the brake pedal to prevent the vehicle from crashing into an object. The vehicle was taken to the dealer, where it was diagnosed, and determined that the suspension had failed and needed to be replaced. The vehicle was repaired; however, the failure recurred. The vehicle was taken back to the dealer on several occasions for the failure, but the failure persisted. The vehicle was later towed to the dealer, but was not diagnosed or repaired, and the dealer refused to service the vehicle. The vehicle was then taken to another dealer, who also refused to repair the vehicle. The manufacturer was made aware of the failure. The approximate failure mileage was 750.
Read More...NHTSA ID Number: 11720129
Complaint Date: 2026-02-24
Fail Date: 2026-02-24
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL S
Model Year: 2014
Summary
The rear door handle has failed and now the door pops open when parked.
Read More...NHTSA ID Number: 11720128
Complaint Date: 2026-02-24
Fail Date: 2026-02-21
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2025
Summary
The vehicle was in the middle of a u-turn when the ICCU fuse suddenly and without warning blew. Display warning messages came on to "check electrical system". Car was able to drive in "limp mode" at about 40 mph on level roads, but not more than 25 mph on any uphill. This is a well known problem with Hyundai EVs. It will be towed to a dealer to confirm. It felt extremely unsafe to be in the middle of a turn on a public street and have the car power system fail. Luckily there was minimal traffic at the moment. A few minutes earlier or later would have been on a heavily trafficked road
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.