NHTSA ID Number: 11720057
Complaint Date: 2026-02-24
Fail Date: 2025-12-14
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: YUKON XL
Model Year: 2001
Summary
The ABS system in this vehicle and many other similar GM vehicles of this year have abs pumps that malfunction and/or randomly stop working just to begin working later. My vehicle currently has the abs fuse removed because whenever it’s in the abs pump runs continuously even when the vehicle is off. The vehicle I own is in good shape with only 80,000 miles. similar gm vehicles of this age with more miles have even more issues specially with the abs system it’s worse in vehicles that also come equipped with traction control.
Read More...NHTSA ID Number: 11720056
Complaint Date: 2026-02-24
Fail Date: 2026-02-17
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2019
Summary
City street driving speed < 35-40 mph, engine began rough idling at stop light after traveling just 1/8 mile. After driving less than 1 mile on level ground, engine slowed and would not accelerate above 20 mph. After another mile or so, increasing uphill grade caused speed to slow to 12-14 mph. Stepping on gas caused car to slow down even more, with shaking and jerky stop-start of vehicle. Maintaining 10-12 mph permitted vehicle to continue uphill climb for a few more miles so I could reach home. Downhill coasting was smooth with no gas pedal acceleration. Overnight parked in garage, and no problems driving vehicle to local independent auto mechanic. They were able to duplicate problem after 2 days and multiple test drives. Diagnosed permanent and temporary engine codes: misfires of cylinders 1 and 4 with ignition coil malfunction, misfires of cylinders 1, 2, 4, and random misfires. Also permanent codes: antilock brake ECM Failure, electric power steering vehicle stability assist System Malfunction, electric servo brake electric power train System Malfunction. Mechanic removed coils and spark plugs, found cylinder 4 has moisture. Coils, plugs cleaned and re-installed. Honda Dealer unable to duplicate problem after 3 days.
Read More...NHTSA ID Number: 11720055
Complaint Date: 2026-02-24
Fail Date: 2026-01-21
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2023
Summary
The component that failed was the Integrated Charging Control Unit (ICCU). This component has failed twice within the past ten months. The failed components are not available for inspection, as they were replaced during prior service repairs. The failure created a significant safety risk because it resulted in a sudden loss of normal vehicle function without advance warning during operation. This placed both myself and others on the road at risk, as the vehicle could become disabled unexpectedly while being driven. The issue has been inspected and confirmed by dealer-authorized mechanics following each occurrence. There were no earlier symptoms prior to the moment of failure. Warning messages related to the vehicle’s electrical system appeared only at the time the malfunction occurred. At the time of each incident, the failure occurred without advance warning during operation. Failures of the ICCU are believed to occur due to electrical overcurrent and thermal stress damaging internal power components during high-voltage to low-voltage conversion. When these internal components fail, the system may no longer maintain the 12V electrical supply, which can lead to loss of vehicle function or sudden loss of motive power during operation. Software updates have been issued to address the issue, but failures have continued to occur.
Read More...NHTSA ID Number: 11720054
Complaint Date: 2026-02-24
Fail Date: 2026-02-01
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SELTOS
Model Year: 2021
Summary
Shuddered into limp mode at a stop sign. Has a sever shudder that throws it into limp mode, loses ability to drive in reverse and then loses ability to drive at all. Has issues shifting gears while driving causing the engine to rev itself while driving. Vehicle has left me stranded on multiple occasions. Has nearly 75,000 miles and I've put just over 4,000 of those on it since acquiring it at the end of October/Beginning of November.
Read More...NHTSA ID Number: 11720053
Complaint Date: 2026-02-24
Fail Date: 2022-11-01
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: 4RUNNER
Model Year: 2022
Summary
Steering shake at 55mph, seems to go away after tires have warmed up. Tried road force balance with no help.
Read More...NHTSA ID Number: 11720052
Complaint Date: 2026-02-23
Fail Date: 2026-02-12
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: EV6
Model Year: 2025
Summary
ICCU failure
Read More...NHTSA ID Number: 11720051
Complaint Date: 2026-02-23
Fail Date: 2026-01-17
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2024
Summary
ICCU failure. Occurred within the first few hundred feet after starting a drive.
Read More...NHTSA ID Number: 11720050
Complaint Date: 2026-02-23
Fail Date: 2026-02-20
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: GENESIS
Model Year: 2016
Summary
Oil light keep coming on when the car is stopped or at the light and turns off when it's running mechanic says it's an oil pressure switch which is a common problem with this car. I read a lot of complaints about this but Hyundai is not doing anything.
Read More...NHTSA ID Number: 11720049
Complaint Date: 2026-02-23
Fail Date: 2026-02-21
Manufacturer Name: UNKNOWN MANUFACTURER
Vehicle Make: UNKNOWN
Vehicle Model: UNKNOWN
Model Year: 9999
Summary
Unknown, I got gifted this vehicle from my mother, and when I was going through all the safety measures I saw this incomplete recall.
Read More...NHTSA ID Number: 11720048
Complaint Date: 2026-02-23
Fail Date: 2025-10-26
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SELTOS
Model Year: 2023
Summary
Incident Date: October 26, 2025 Summary: On October 26, 2025, while merging onto a highway at high speed, the vehicle experienced a sudden and total electronic safety system failure. Without driver input, the Forward Collision-Avoidance Assist (FCA) system engaged the brakes (phantom braking), causing a dangerous, unprompted deceleration in active traffic. Simultaneously, the Electric Power Steering (EPS) assist failed, making the steering wheel extremely heavy and difficult to maneuver while trying to merge. Dashboard Alerts: The instrument cluster displayed a "Check Forward Collision-Avoidance Assist system" message, and the following warning lights illuminated: Master Warning, ABS, Traction Control (ESC), and Forward Safety. Attempted Remediation: I pulled the vehicle over and let it cool down for over an hour, but the warning lights and system failures persisted upon restarting. Per manufacturer-recommended troubleshooting found online, I thoroughly cleaned all exterior sensors and was forced to manually disable the collision-avoidance and alert systems via the vehicle's computer settings just to be able to drive the car home safely. Current Safety Concern: Since this event, the vehicle has exhibited increased skidding and inconsistent traction during normal driving conditions. This instability occurs on any road at any time, specifically when performing routine turning maneuvers, and is not limited to winter conditions. This suggests a deeper mechanical or software failure within the ABS/ESC/AWD control modules that cannot be resolved by the driver. This VIN currently shows no active recalls, but the symptoms match the known defects in the SC275 and SC336 campaigns exactly.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.