NHTSA ID Number: 11719097
Complaint Date: 2026-02-19
Fail Date: 2026-02-05
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-350
Model Year: 2021
Summary
Cold side intercooler boost tube cracked due to constant vibration impact from coolant overflow hose routed directly above and on top of it. Part and vehicle is available for inspection. The split in the boost hose caused me to loose power while attempting to merge onto a road, almost being hit by another vehicle. After research there are multiple other instances of complaints of the same thing happening to others and multiple aftermarket manufacturers producing replacement and upgraded parts with references and warnings of the same thing happening for the last 10 years. No warning lamps or symptoms prior to failure. After failure no warning lamps but could hear an audible hiss. The vehicle has not yet been inspected by the dealer or police. I was told by their parts people it is a regular failure and the part costs typically around $200 and they only sold it as a full part and not just the rubber replacement hose althought they are separate parts connected with hose clamps.
Read More...NHTSA ID Number: 11719096
Complaint Date: 2026-02-19
Fail Date: 2025-09-19
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PILOT
Model Year: 2016
Summary
Three times at a stop light my car goes into the engine idle stop mode and when the light turns green my car won’t get out of the mode. I have to put it into park and restart the car to go. I have almost been hit twice.
Read More...NHTSA ID Number: 11719095
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: CAMRY HYBRID
Model Year: 2026
Summary
The contact owns a 2026 Toyota Camry Hybrid. The contact received notification of NHTSA Campaign Number: 25V869000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719094
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: HIGHLANDER
Model Year: 2021
Summary
The contact owns a 2021 Toyota Highlander. The contact stated that while driving at an undisclosed speed, there was an abnormal whining sound coming from the transmission. The contact was concerned about the sound and contacted a dealer. The vehicle was driven to the dealer and was diagnosed with transmission failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 60,347.
Read More...NHTSA ID Number: 11719093
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2024
Summary
Rear windshield spontaneously shattered and fell into back of vehicle. No external event caused the shatter…it just happened with no outside cause. No rocks or bullets found inside the car, just broken glass.
Read More...NHTSA ID Number: 11719092
Complaint Date: 2026-02-19
Fail Date: 2025-11-06
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: WRANGLER 4XE
Model Year: 2024
Summary
The contact owns a 2024 Jeep Wrangler 4XE. The contact received notification of NHTSA Campaign Number: 25V766000 (Engine); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at highway speeds, the vehicle was unstable. The were an abnormally loud sound coming from the engine while driving. The failure was more noticeable while driving in EV Mode. The contact stated that the vehicle had been removed from the Manufacturer's website for sale and that there were lawsuits involving the vehicle. The dealer was contacted and confirmed that there was no fix available. The manufacturer was made aware of the issue and opened a case. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 14,317.
Read More...NHTSA ID Number: 11719091
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2025
Summary
The contact owns a 2025 Ram 2500. The contact was made aware that the VIN was associated with NHTSA Campaign Number: 26V059000 (Exterior Lighting, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that several dealers were contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available for the recall repair and informed the contact that the parts were being rationed. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719090
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: TUNDRA
Model Year: 2000
Summary
On February 19, 2026, I contacted Hendrick Toyota Apex (1210 Laura Village Rd, Apex, NC 27523) to schedule repair for two open safety recalls on my 2000 Toyota Tundra (VIN: [XXX] ) under NHTSA Campaign #09V444, Toyota Campaigns BXD and BZD. The dealership incorrectly refused to perform either recall, stating that neither could be done in North Carolina because they only apply to cold climate states. This is incorrect — Campaign BZD was specifically created as a supplemental campaign to allow Toyota dealers outside the 20 cold climate states to inspect and repair covered vehicles. I was turned away on my first call. Only after calling back a second time to lodge a complaint did a different representative look up the recalls and confirm that Campaign BZD can in fact be performed at their location. Had I accepted the initial refusal, I would have been denied a free safety recall repair on a vehicle with 255,656 miles and visible frame corrosion. The dealership's staff appear to be untrained on recall Campaign BZD and are likely turning away other affected Tundra owners. I have call recordings documenting the incorrect refusal. I am requesting NHTSA review this dealership's handling of recall #09V444 to ensure other consumers are not wrongly denied safety recall service. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719089
Complaint Date: 2026-02-19
Fail Date: 2025-02-12
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-350
Model Year: 2015
Summary
The contact owns a 2015 Ford F-350. The contact stated that while in reverse(R), the rearview camera displays a blue screen or a blank screen while in reverse. The contact then received notification of NHTSA Campaign Number: 25V572000(Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was notified of the failure and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time to repair the recall. The manufacturer was notified of the failure and gave the contact the same information as the dealer. The vehicle was not repaired. The failure mileage was approximately 55,000.
Read More...NHTSA ID Number: 11719088
Complaint Date: 2026-02-19
Fail Date: 2026-01-07
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: BLAZER
Model Year: 2021
Summary
This submission is an additional report related to NHTSA complaint #11714381. At approximately 55,000 miles, my 2021 Chevrolet Blazer experienced a sudden throttle body failure while driving. The vehicle entered reduced engine power/limp mode without warning and acceleration was significantly limited. This created a safety concern while driving in traffic, particularly when merging and crossing intersections. Diagnostic code P2101 (Throttle Actuator Position Performance) was present. A Chevrolet dealer confirmed an internal throttle body failure and replaced the throttle body assembly. Although the repair was completed, this failure occurred at relatively low mileage for a critical engine control component. A sudden loss of acceleration can pose a safety risk depending on traffic conditions. Since filing my original complaint, I have identified multiple similar reports online and in owner forums describing premature throttle body failures in GM vehicles with similar symptoms (reduced power/limp mode and limited acceleration). This suggests the possibility of a broader pattern involving this component. I am submitting this additional report so that NHTSA has a complete record of the incident and potential pattern of premature throttle body failures. If this issue is widespread, it may warrant further review or investigation as it affects vehicle acceleration and safe operation.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.